Home Network Community > Wi-Fi Routers > trafiic generation on ax53
< Wi-Fi Routers

trafiic generation on ax53

trafiic generation on ax53

trafiic generation on ax53
trafiic generation on ax53
Friday - last edited 20 hours ago
Tags: #Network Connectivity #Access Point Mode
Model: Archer AX53  
Hardware Version: V1
Firmware Version: 1.5.4 Build 20250926 rel.87654(4555)
Gentlemen, I have an AX53 as an AP, connected to a MikroTik router... I dropped it's internet connection and it turns out the router is generating over 1 MB of traffic per hour... What's wrong? The re605 is also set to drop in the firewall and doesn't generate anything, the re305 doesn't generate anything either, and two AX53s with the same hardware revision and the same software are sending large amounts of data. 1.100 and 1.19 are ax53...  time synchronization is off ,  what generates traffic there?
 
 
  0      
 
  0      
 
#1
Options
4 Reply
Re:trafiic generation on ax53
Friday

  @BartekBB please fix firmware, 

  0  
  0  
#2
Options
Re:trafiic generation on ax53
8 hours ago
194.204.159.1 and 194.204.152.34 are ip-addresses of Orange PL Others are ip of some Universities. Did you check clients on AX53?
  0  
  0  
#3
Options
Re:trafiic generation on ax53
6 hours ago
The ax53 is working as an AP, so I don't think the clients have anything to do with it... The ax53 is set to AP mode, where I've removed the ax53's IP address from the firewall on the router (MikroTik) and created a log using the drop rule. It's clearly trying to query DNS almost constantly. In my opinion, this is a software bug.
  0  
  0  
#4
Options
Re:trafiic generation on ax53
6 hours ago
Even if no client is connected to this access point, DNS queries are still generated.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 98

Replies: 4

Tags

Network Connectivity Access Point Mode
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.