hi All ,

I report two problems encountered on the Deco BE65-5G with current firmware:

1) SSH PROBLEM: The SSH (dropbear) service is active and accepts connections even with SSH disabled by the settings. Successful accesses from unidentified IPs with the entry 'Login attempt for nonexistent user / Password auth succeeded' appear in the system logs, on an installation with a single node and no SSH functionality enabled by the user.

2) 6GHz BAND/STEERING BAND PROBLEM: The nrd daemon performs continuous 802.11k measurements (every 6 seconds) on WiFi 7 devices with Apple N1 chips (iPhone Air), which support a maximum of 160MHz of bandwidth on 6GHz. The BE65-5G operates at 320MHz on 6GHz and does not expose options to reduce channel width, causing an uninterrupted loop of 'not MLD!' errors and periodic nrd crashes resulting in increased CPU utilization.

The Service Qos,IoT, VpN and others are disable, but the CPU work to 11% usage and memory to up 49%... I've a Log file to this elements .

I attach the system logs to support it. Thank you.