Deco X90 on Vodafone Broadband FFTH

Deco X90 on Vodafone Broadband FFTH

Deco X90 on Vodafone Broadband FFTH
Deco X90 on Vodafone Broadband FFTH
Friday - last edited Saturday
Model: Deco X90  
Hardware Version: V1
Firmware Version: 1.4.0 Build 20250102 Rel. 65004

Username and password which is fine to enter.

 

I'm having trouble with the next part:

 

Vodafone gave me a VLAN ID number, and a  VFL- number

 

It's not obvious to me which boxes they go in on the IPTV/VLAN options?

 

Also which priority to choose from 0-7.

 

Maybe this is simple but I've tried all combinations I think.

0
0
#1
4 Reply
Re:Deco X90 on Vodafone Broadband FFTH
Friday

  @GF13 actually this is in WiFi router mode.

 

vodafone now say that I don't need the VFL only the VLAN ID.  Also they mis-typed the username the first time but I'm still getting no internet connection.

1
1
#2
Re:Deco X90 on Vodafone Broadband FFTH
Saturday

  @GF13 

Hi, welcome to the community.

You can refer to the instructions below to configure VLAN settings on the Deco.
Deco VLAN ID Set Up: How to Configure Your TP-Link Internet Connection for ISP Requirements
 

If the Deco is not connected to the internet, please try the following steps.
  1. Contact your ISP to double-check whether your configuration information is correct, such as the VLAN ID, internet connection type, etc.
  2. On the Deco app > More > Internet Connection page, if you have a valid IPv4 address, you can try changing the DNS server to see if it helps: How to Change DNS Settings on Your TP-Link Deco
  3. If you have an old router, please try disconnecting the Deco from the ISP line and using the old router instead, then configure the old router and check if it will work.

 

Best regards

0
0
#3
Re:Deco X90 on Vodafone Broadband FFTH
Yesterday
Thanks for sharing the link. I'm former tech support for an ISP in the UK. If the OP is in the UK and they are on a Vodafone connection provided via Openreach, then a VLAN ID is not needed as the Openreach ONT or Openreach modem will carry out the VLAN tag insertuon. If, however, they're on a Cityfibre connection, their ONT does not provide VLAN tag insertion, in which case, the link you provided should be followed.
0
0
#4
Re:Deco X90 on Vodafone Broadband FFTH
Yesterday

  @GF13 are you the same person I replied to on Reddit? Haha. 

 

If not, the below is what I put there and it helped them out.

 

If you've been told you need to also set a VLAN ID, this will be done under Settings - Advanced - IPTV/VLAN. You'll probably find Vodafone UK or any UK provider is not listed so scroll right down and select "other" or "not listed". Next up, when you go back one step eet the VLAN to whatever Vodafone told you do do, and the priority as 0. If your connection is via City fibre, the VLAN ID is usually 911.

0
0
#5