Home Network CommunityDecoDeco x60 (v4.2) AX5400 no option to check the CPU and Memory Usage.
Deco

Deco x60 (v4.2) AX5400 no option to check the CPU and Memory Usage.

Deco x60 (v4.2) AX5400 no option to check the CPU and Memory Usage.

Deco x60 (v4.2) AX5400 no option to check the CPU and Memory Usage.
Deco x60 (v4.2) AX5400 no option to check the CPU and Memory Usage.
Saturday
Tags: #Feature Request #Reports #CPUMemoryStat
Model: Deco X60  
Hardware Version: V4
Firmware Version: 1.5.0 Build 20250801 Rel. 55258

Hello I just got the 3 Deco x60's Ax5400 for my Home mesh with the dual core Qualcomm IPQ5018 chips (which sucks because v1 and v2 had enterprise grade quad core IPQ8071) but for my home networking mesh they're enough because I don't plan to use VPN tunnels on the mesh as even Wireguard will bottleneck the processor.
After initial setup and upgrading the firmware to the latest available 1.5.0 Build 20250801 Rel. 55258 I can't seem to find a option to check the CPU and Memory stats.

Ideally the CPU and Memory stats are shown in the WebUI Network Map but in my case its empty I have attached a screenshot below.
 

But if I use the search button in the web UI and search for Cpu and Memory I can see CPU Load and Memory Usage in the results (that means these features are implemented at the WEBUI level) it redirects me to the Network Map again which does not have any info regarding the CPU load and Memory Usage.



I have also tried to check this on the Deco App Tapping on the Node and then going to Device Info but its empty there too!! ( I'm using the latest version Deco android app v 3.10.188 )


Please guide how to access these info, because I need these stats to monitor my device in real time.

  34      
34
#1
Options
4 Reply
Re:Deco x60 (v4.2) AX5400 no option to check the CPU and Memory Usage.
Yesterday

  @Dhubu 

Hi, 
On the Deco's web UI > Network Map page, please scroll to the bottom of the page and check whether the CPU and Memory section appears.

Best Regards

>> Check What's Currently Going on With Deco >> Deco Wi-Fi Heatmap ready for all Deco models
  0  
0
#2
Options
Re:Deco x60 (v4.2) AX5400 no option to check the CPU and Memory Usage.
Yesterday

  @Solla-topee Hello, negative even on the bottom of the web UI the CPU and Memory stats are missing I've attached the scrolling screenshot of the entire WebUI page in the original message.

Even on the Deco app where the status must show up it's missing.

  1  
1
#3
Options
Re:Deco x60 (v4.2) AX5400 no option to check the CPU and Memory Usage.
16 hours ago

  @Dhubu 

Hi, 
Here is a new firmware (v1.6.0 Build 20250720) for the Deco X60 V4.2. Please download and unzip the firmware file, follow the instructions below to update the Deco's firmware, and check whether you can see the CPU and Memory section in the Deco's web UI.
How to Update TP-Link Deco Firmware

Best Regards

>> Check What's Currently Going on With Deco >> Deco Wi-Fi Heatmap ready for all Deco models
  1  
1
#4
Options
Re:Deco x60 (v4.2) AX5400 no option to check the CPU and Memory Usage.
16 hours ago

  @Solla-topee Thanks for the heads up, but the firmware you've redirected is the Deco X60(EU)_V4.20_1.6.0 Build 20250720 which is the EU version while I have a US version are the firmware interchangeable? I think the bands are different on both version due to CE regulations in EU.
But if you confirm that its safe to flash the EU version on US I'll go ahead.
Thanks!

  1  
1
#5
Options

Information

Helpful: 34

Views: 147

Replies: 4

Tags

Feature Request Reports
CPUMemoryStat