TP-Link Community > Tapo Smart Cameras > iSpy setup configs working for NC250
< Tapo Smart Cameras

iSpy setup configs working for NC250

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

iSpy setup configs working for NC250

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
iSpy setup configs working for NC250
iSpy setup configs working for NC250
2016-09-10 16:42:04
Model : NC250

Hardware Version : XXXX

Firmware Version :1.0.10

-----------------------------------------------------------------------------------------


I have been able to setup the NC250 in iSpy using the below

FFMPEG

rtsp://admin:@/h264_hd.sdp
e.g rtsp://admin:admin@192.168.0.1/h264_hd.sdp

The issue with iSpy is that the URL gererated by the wizard or the online URL generator creates the wrong URL. It creates a h264_vga.sdp instead of the h264_hd.sdp
  0      
 
  0      
 
#1
Options
6 Reply
iSPY
2016-09-27 05:52:00
Hi:

Thanks for the information, was very userful, but my cams go offline a few seconds.

Regards
  0  
  0  
#2
Options
Re:iSpy setup configs working for NC250
2016-09-27 20:45:25
Hi grimf, thanks for the feedback, just to let you know that i have not had any issues with my NC250 cameras going offline, they work perfectly in iSpy while running the version 1.0.10 firmware. Are they going off-line in iSpy or Just in general when you are using the built in webpage? personally i would start a ping and check the reply to see if the camera is either powering down or if there is some kind of network issue that is causing the stream to stop.
  0  
  0  
#3
Options
Re:iSpy setup configs working for NC250
2016-10-11 08:24:20
Hi i think was a net issue, now my iSpy is working perfectly... aditional the TP Link Team Support send me by email a beta from de camera control for windows and is working perfectly.
  0  
  0  
#4
Options
Re:iSpy setup configs working for NC250
2016-11-21 12:58:24
I would love to know how you got it working. I have 5 of these and would love to get them working on ispy. IF you dont mind could you give step by step directions? I have tried much and spent days but cant get them working. No video and red disconnected emblem at top right corner in ISpy.
  0  
  0  
#5
Options
Re:iSpy setup configs working for NC250
2016-11-21 17:31:11
Hi icyman, first thing first can you get to the cameras on your network? Are you using DHCP or static IP address's?
  0  
  0  
#6
Options
yes
2016-11-22 18:26:42

ferroresonance wrote

Hi icyman, first thing first can you get to the cameras on your network? Are you using DHCP or static IP address's?


I can view them and hear sound. Everything works using the web interface on the network.
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 1382

Replies: 6

Related Articles
NC220 iSpy Setup Guide
2128 0
Night settings and Ispy
1537 0
NC 250 Cam
439 0
TC60 not connect with iSpy
180 0
Snapshot jpg NC-250
1475 0
config for two Lines
456 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.