VR900 - VLAN Interface Grouping Issue

VR900 - VLAN Interface Grouping Issue
VR900 - VLAN Interface Grouping Issue
2016-11-07 17:26:17
Model :

Hardware Version :

Firmware Version :

ISP :

Hi,

I have created new VLAN 50 (Interface Grouping -->Add) with option "Enable Group Isolation" on ETH4 and in the final router configuration are presents two VLAN: 1 ( on ETH1-3) and 50.
The router has now two IP address (gateway of subnet): 192.168.10.1 for VLAN 1 and 192.168.50.1 for VLAN 50
The strange situation is on my desktop, laptop etc.. linked on VLAN 1 (192.168.10.0/24 ETH2) I reach the router host 192.168.50.1 that is on VLAN 50.
All connections are made without "managed switch for VLAN" for semplify the tests.
The VLAN are isolated because i reach others device only in their correct VLAN, but this situation is not valid for the router IP from VLAN1 I reach the router IP assigned for VLAN 50 and viceversa
There is somebody can you explain me whats wrong in my configuration? There is a bug on router?

Thank you so much


Archer VR900 v1
Firmware Version:0.9.1 1.4 v004c.0 Build 160316 Rel.44905n
0
0
#1
Options