CG-NAT Blocks my OpenVPN and restricks the NAT type

Used Products:

Credit to a customer named Roger Wentland.

 

After buying the TP-Link router to used in my house, I can get the internet on my device without an issue. However, there are two devices in my network that can’t work properly - my camera and a switch.

To view the camera from the outside network, I need to connect the OpenVPN to my router. And another strange thing is that my switch network couldn't play online games with others. When checking internet connectivity on the switch, the NAT setting is “D”. The information on the network tells me that I need to set port forwarding or DMZ, but neither works in my case.

So I contacted TP-Link Support, and they checked my OpenVPN configuration file(Use the txt/notepad+ to open the OpenVPN configure file) and told me that my router's WAN IP is a private network IP.

 

Then I contacted my ISP-Comporium. I did an online chat with Comporium and the tech gave me a link that shows my public IP address and CG-NAT IP address. The tech confirmed that CG-NAT will block the OpenVPN connection, or it blocks some ports automatically for my network. The Comporium also offers a Static IP address access to solve the issue, but I need to pay a small fee.

(Related data of Comporium: https://www.comporium.com/help/cgnat-transition-faq/)

 

Although I would like to find other ways to solve this problem, buying a static IP is undoubtedly the most convenient one. With a static public network IP, I can normally use my OpenVPN and forward the local resources to the outside.

 

Except Comporium, my ISP, I also know that DirectLink, who provides a radio service, is one of another CG-NAT ISPs in my country. BTW, I'm based in the United States. 

(Wiki: CGN or CG-NAT is a type of NAT for use in IPv4 network design. It permits the sharing of small pools of public addresses among many end sites. This shifts the NAT function and configuration thereof from the customer premises to the Internet service provider network. So there's a layer of NAT processing in front of the router.)

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
2

Comment

Hi,

I used to have the same limited NAT type with Deco and I noticed there is a similar post:

https://community.tp-link.com/en/home/forum/topic/262836 

good information for router  

nice information Router <a href=https://brandingfriend2021.blogspot.com/>Best Baby Colic Formula and Its Effect 2021 hindi.!</a>

Thank you

Hello, World ! Wi-Fi

CG-NAT, commonly used by ISPs, can disrupt OpenVPN connections and limit NAT type options on TP-Link routers. This results in restricted network capabilities, hindering online gaming and VPN performance. To mitigate this, consider requesting a static IP from your ISP or using a VPN service that supports traversal through CG-NAT, ensuring a smoother online experience and more flexible NAT type settings.

tplinkrepeater.net login
 

upload
    upload
      Subscriptions