SMB v1 protocol is not supported anymore in windows 10 We need SMB v2 or v3
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hardware Version :
Firmware Version :
ISP :
Hello.
I have an Archer C2 v1 and i cannot acces anymore any USB drive(sda) connected to router USB port via tplinklogin.net because router have an old SMB1 protocol and is needed SMB2 or 3. What can we do in this situation? I think probably all your routers are in the same situation now...
There is any other posibilities to acces usb shares from router in windows 10?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
we need smb v2 or v3 I bought an Archer C3150 v2 for that purpose to share a drive on my network under windows 10. When the new firmware will be released ?
- Copy Link
- Report Inappropriate Content
Thanks for your requesting.
Sorry to tell you that we are not sure when the firmware will be released.
It is very suggested to keep an eye on official website and wait for the updates.
Good day.
- Copy Link
- Report Inappropriate Content
Hi @Kevin_Z
Thanks for your reply.
However HTTP/or HTTPS is not working anymore either, nor does the FTP suffice.
There is an USB connection on the modem that basically has no use, as SMB1 is - as you should be aware now since a few years - not safe. The statement that you are "not sure" about an update is also below expectations for TP-Link. As far as I can see there has been the situation of "not sure" for more than three years now.
There appears to be a 2018 update for the Australian version of the firmware tho. Is this usable for the European modems? and does THAT have the smb2 enablement in it?
What would be the implications of loading that firmware in the modem?
Kind regards :)
Rick
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 23786
Replies: 23
Voters 0
No one has voted for it yet.