Archer T4U V2 keep disconnecting
Archer T4U V2 keep disconnecting
Hi guys
my Archer T4U V2 keep disconnecting. I am using windows 10 and my router is Asus RT-AC58U.
I believe the problem is with 5G, not 2.5G.
is anyone have the same issue? is there any sulotion for this problem?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@TigerAli had the same problem, and finaly find a solution for me.
Windows 10 forces it's own driver, wich seems to be the problem. You have to download de driver from tplink page, then, you must disable windows 10 driver signature enforcement (https://windowsreport.com/driver-signature-enforcement-windows-10/).
I was constantly having issues with the other driver, continuous disconnects when reaching hig speed downloads, It was driving me crazy. I follow those steps, and no more disconnetions for me.
Hope it Helps.
Cheers
- Copy Link
- Report Inappropriate Content
Hi everyone,
21-5-13 Update: removed old driver
For T4U unstable issue:
- Uninstall your current driver, and reinstall the official driver on tp-link website as # 3
- Disable your old wireless adapter
- Try the chipset driver for Archer T4U:
- Copy Link
- Report Inappropriate Content
Hi,
Check Wi-Fi signal strength. If signal is weak, move the computer closer to your router if possible.
Change 5G channel and channel width on your router to avoid possible interference.
Try this driver
http://support.tp-link.com/f/1d65b3727c/?dl=1
Installation guide
https://www.tp-link.com/en/faq-920.html
- Copy Link
- Report Inappropriate Content
@TigerAli had the same problem, and finaly find a solution for me.
Windows 10 forces it's own driver, wich seems to be the problem. You have to download de driver from tplink page, then, you must disable windows 10 driver signature enforcement (https://windowsreport.com/driver-signature-enforcement-windows-10/).
I was constantly having issues with the other driver, continuous disconnects when reaching hig speed downloads, It was driving me crazy. I follow those steps, and no more disconnetions for me.
Hope it Helps.
Cheers
- Copy Link
- Report Inappropriate Content
Purulutus wrote
@TigerAli had the same problem, and finaly find a solution for me.
Windows 10 forces it's own driver, wich seems to be the problem. You have to download de driver from tplink page, then, you must disable windows 10 driver signature enforcement (https://windowsreport.com/driver-signature-enforcement-windows-10/).
I was constantly having issues with the other driver, continuous disconnects when reaching hig speed downloads, It was driving me crazy. I follow those steps, and no more disconnetions for me.
Hope it Helps.
Cheers
I registered an account today to confirm that this solution worked for me.
My TP-Link AC1300 T4U kept disconnecting from the 5G WiFi network during periods of high traffic. After hearing the disconnect sound, the adapter would reconnect, and then randomly disconnect and reconnect from then on.
Checking device manager after the first disconnect, I could see that it had reverted to using the default driver (Driver Provider: Microsoft) rather than the TP-Link provided driver (Driver Provider: TP-Link Technologies Co., Ltd.). Switching it back to the TP-Link driver would only last a few mins before Windows 10 reverted it back to the Microsoft driver.
@Purulutus solution to disable Windows 10 driver signature enforcement (see https://windowsreport.com/driver-signature-enforcement-windows-10/) worked. After you have disabled Windows 10 driver signature enforcement, restart your PC. You may also need to manually re-select the TP-Link provided driver from device manager after you have restarted, but once selected, it should remain the selected driver from then on.
The screenshot below shows the correct driver.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi everyone,
21-5-13 Update: removed old driver
For T4U unstable issue:
- Uninstall your current driver, and reinstall the official driver on tp-link website as # 3
- Disable your old wireless adapter
- Try the chipset driver for Archer T4U:
- Copy Link
- Report Inappropriate Content
@Solla-topee Thanks for your reply. Just got the time to check it out. Unfortunately, the driver you provided cannot be install. It is stuck on 90% for like 30 minutes now. I realize it's a T3U Adapter and I don't think it's compatible with the T4U. Thus, the setup can't continue. You got the T4U edition ?
Already open the setup instead of the autorun. Still can't proceed.
- Copy Link
- Report Inappropriate Content
@HariszKilz Hi,
Thank you for your valuable feedback, I updated a new public driver for T3U/T4U in the recommended solution, please give it a try and see if this driver helps ~
- Copy Link
- Report Inappropriate Content
@Solla-topee Hi. Thank you for your prompt reply. I currently using the driver provided by @Kevin_Z in this post: https://community.tp-link.com/en/home/forum/topic/232000
So, it's looking kinda fine for now but I yet to test it downloading something big as the disconnecting issue will only occur to me if I downloading big size files. Probably disconnect due to high traffic but I will monitor it for now. If the previous driver does not work, I will use the new driver that your provided. Again, thank you :)
- Copy Link
- Report Inappropriate Content
Background:
Got a brand new Archer T4U V3 after my previous EDUP wifi adapter failed after about a year or so.
Before that, my PC had a NET-DYN adapter which lasted maybe 3 years or so before dying.
As soon as I got the T4U, it had a terrible time staying connected to the internet, kept disconnecting and reconnecting at random times as if someone had unplugged the USB.
I thought signal was bad so I got a USB extension and put it up higher, but it still had the issue, and Windows said device driver was the latest version.
Was able to resolve this issue via the following steps:
1. Went to Control Panel -> Hardware and Sound -> Devices and Printers -> right click wifi adapter -> Properties -> Hardware -> Properties -> Change Settings -> Driver -> Uninstall Device, uninstalled driver for the T4U as well.
2. After this, the Archer T4U could no longer connect to the internet.
3. Ran Microsoft troubleshooter on the adapter, installed generic Microsoft driver, still could not connect.
4. Ran troubleshooter again, it did some kind of network reset and administrative change, still couldn't connect.
5. Downloaded T3U/T4U Beta driver from this forum: https://community.tp-link.com/en/home/forum/topic/153227?replyId=506056
6. During install, it got stuck at 90% and never finished, so I canceled the installation.
7. Ran troubleshooter again, still no connection.
8. Downloaded T4U driver from TP-Link website via laptop, copied to desktop PC. I believe it was this page: https://www.tp-link.com/us/support/download/archer-t4u/#Driver
9. In Device Manager, removed the Archer T4U adapter.
10. Unplugged Archer T4U for a little while, plugged it back in.
11. It appeared in Device Manager.
12. Installed the downloaded T4U driver, now the Wifi Adapter works perfectly without constantly disconnecting, playing the sound, and showing the no connection globe symbol on taskbar.
Additionally, after the device started working properly:
1. In Devices and Printers -> Wifi Adapter -> Properties -> Hardware -> Properties -> Change Settings -> Power Management, turned off the "Allow the computer to turn off this device to save power".
2. In Control Panel -> Hardware and Sound -> Power Options -> Change Plan Settings -> Change advanced power settings -> USB settings -> USB selective suspend setting -> Made sure it was disabled. Also Wireless Adapter Settings -> Power Saving Mode -> Setting: Maximum Performance.
I had already tried these options earlier, they didn't resolve the disconnecting but still seemed like a good idea to keep.
3. Opened wifi adapter to nearly 180 degrees, but bent in one tick. This seemed to reduce some occasional slowness I was getting when other people were in the room using wifi.
I'm thinking either the T3U/T4U beta driver failed install fixed the issue, or else removing the device and re-installing the driver from the website somehow resolved the issue. I'm thinking it's also possible that the other 2 wifi adapters used on this PC may have been causing some sort of issue for the Archer as well.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 18273
Replies: 11
Voters 0
No one has voted for it yet.