VR600v USB Question

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VR600v USB Question

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VR600v USB Question
VR600v USB Question
2019-04-11 07:09:00 - last edited 2019-04-11 09:46:45
Model: Archer VR600v  
Hardware Version: V2
Firmware Version: 1.0.0 0.9.1 v0078.0 Build 170814 Rel.66346n

Hello,

 

I have a VR600v, I was using 4x 2TB WD Elements USB Powered Hard Drives via a 4port non powered hub as my Media Server. All was working well.

 

I had a chance to get some 4TB WD Elements USB Powered Hard Drives for a reasonable price and jumped at it knowing that I'll need more space soon, so I purchaced 4 as upgrades. All are NTFS Formatted.

 

So I replaced the 4x 2TB with the 4x 4TB, but after plugging in the third, it would start clicking. Ok, I thought, needs more power for the larger drives. So I ordered a 4 port powered USB 3.0 Hub (yes, I know it's only USB 2 on the router, just wanted to make sure the drives where getting the power they need). Everything seemed to be working fine, I could see and access the new 4x 4TB Drives. However after about 10 minutes or so the router would reboot, power back up and maybe 5-10 minutes it would reboot again, looping.

 

I thought it might be a power issue as everything is running from the one power outlet via a UPS. So I grabbed an extention cord and ran it from another power outlet to solely power the router, so the router should be getting enough power, still rebooting.

 

I disconnected one of the 4TB drives, still rebooting. So I disconnected another 4TB drive an no more rebooting. Totally confused as to why,

 

So I can get 4x 2TB's working without the need for a powered USB hub, or I can have 2x 4TB's, but I can't have what I want, and that's 4x 4TB hard drives without the constant reboots. If anyone can shine a light on this it would be welcomed.

 

P.S. I contacted support via online chat from TP-Link's Webpage before I bought the VR600r with questions about the how many USB drives, size limits, etc, and was told that I could have up to 4 USB Hard Drives and 4TB+ Drives would work (as long as they weren't partitioned).

 

Kozza

  0      
  0      
#1
Options
1 Reply
Re:VR600v USB Question
2019-04-11 10:42:12

Hi,

 

Sorry for the inconvenience caused here. 

 

For your information, 4 HDD in one port is extremely beyond the ability of a simple router, so it is not recommended to use like that. 

 

Meanwhile, you setup HDD as media server, which occupies capacity a lot. Cause the router works fine with 2 HDD plugged, you can use them as a workaround first.

 

Besides, we will forward it to our R&D colleagues and they can work on it and improve its capacity and performance. 

 

Thanks for your cooperation and understanding. 

 

Good day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 642

Replies: 1

Related Articles