Home Network Community > All Threads > Cannot set up TCP/IP port for a printer behind a TL-PS310U
< All Threads

Cannot set up TCP/IP port for a printer behind a TL-PS310U

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cannot set up TCP/IP port for a printer behind a TL-PS310U

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cannot set up TCP/IP port for a printer behind a TL-PS310U
Cannot set up TCP/IP port for a printer behind a TL-PS310U
2019-05-15 15:45:44 - last edited 2019-05-15 16:35:45
Model: TL-PS310U  
Hardware Version:
Firmware Version:

Hello,

 

I followed the guide at https://www.tp-link.com/en/support/faq/1622/ to setup a TCP/IP port for a printer connected to TL-PS310U. I tried both protocols raw and LPR but without any success.

 

Print jobs using the raw protocol are staying in the cue, LPR print jobs are leaving the print cue but still nothing is printed.

 

What can I do?

 

In the web interface of the TL-PS310U the printer is listed. I am working on a windows server 2016.

 

Thanks, Chris

 

 

  0      
 
  0      
 
#1
Options
1 Reply
Re:Cannot set up TCP/IP port for a printer behind a TL-PS310U
2019-05-20 08:03:51

Hi,

 

What is the model number of the printer?

 

With your printer connected to the Windows server 2016 directly, can you print successfully? 

 

Have you ever setup the PS310U yet? Have you downloaded the utility on your computer?

https://www.tp-link.com/support/download/tl-ps310u/#Utility

 

Besides, please make sure the device can communicate with Print Server; and ensure that the printer has connected  to the print server successfully.

 

May it help and have a good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 1340

Replies: 1

Related Articles
TCP/IP Port without Printer Controller Utility
626 0
TL-WR1043ND Printer Connection via TCP/IP Port without Printer Controller Utility
784 0
Error "the port of auto connect cannot be a LPR / raw TCP / SMB port"
5328 0
Set up main deco behind a switch
638 0
TD-W8951ND Can't open a TCP/IP Port
420 0
Printer cannot get IP address, connecting to X60
708 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.