Home Network Community > All Threads > Bricked my router.
< All Threads

Bricked my router.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Bricked my router.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Bricked my router.
Bricked my router.
2019-11-18 08:50:03 - last edited 2019-11-23 10:51:21
Model: TL-WR840N  
Hardware Version: V4
Firmware Version:

I bricked my device while trying to install a custom firmware. Please help me unbrick and recover my device. Thanks

 

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Bricked my router.-Solution
2019-11-19 02:34:10 - last edited 2019-11-23 10:51:21

@Nirakar 

 

Hello, you can try to use the TFTP firmware recovery menthod to give it a go. 

 

You can read this article to get some instruction. 

https://community.tp-link.com/en/home/stories/detail/582

 

If still the same, I'm afraid that there is not much we can do.

 

Wish you good luck. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#3
Options
Re:Bricked my router.-Solution
2019-11-22 10:42:01 - last edited 2019-11-23 10:51:26

@AdrianG001 Tried it but it does not work. Anyway thank you. I already bought a new router.

 

Recommended Solution
  0  
  0  
#7
Options
8 Reply
Re:Bricked my router.
2019-11-18 13:32:05
Many times once you brick a router, that is the end of it. Some of those custom firmware packages on some routers are non reversible. They are a hack by hackers. Big issue is you need to get the router into the load firmware mode that generally require a working router.
  0  
  0  
#2
Options
Re:Bricked my router.-Solution
2019-11-19 02:34:10 - last edited 2019-11-23 10:51:21

@Nirakar 

 

Hello, you can try to use the TFTP firmware recovery menthod to give it a go. 

 

You can read this article to get some instruction. 

https://community.tp-link.com/en/home/stories/detail/582

 

If still the same, I'm afraid that there is not much we can do.

 

Wish you good luck. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#3
Options
Re:Bricked my router.
2019-11-19 08:33:27

@Kevin_Z I tried it. The firmware gets downloaded completely but my router doesn't restart. It just blinks again and again. I think it's time to buy a new one. Thanks for your help.

 

  0  
  0  
#4
Options
Re:Bricked my router.
2019-11-20 02:02:14

@Nirakar 

 

Thanks for your reply. 

 

Sorry to hear that it cannot be fixed, while it seems it is the time to buy a new one with better performance. 

 

You can order a new one to get internet.

 

If need more help, please let us know.

 

Good day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options
Re:Bricked my router.-Solution
2019-11-22 10:42:01 - last edited 2019-11-23 10:51:26

@AdrianG001 Tried it but it does not work. Anyway thank you. I already bought a new router.

 

Recommended Solution
  0  
  0  
#7
Options
Re:Bricked my router.
2019-11-23 10:48:30

@Nirakar 

 

Okay, that would be fine, you can use the new router to get internet. 

 

If need more help, be free to let us know.

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#8
Options
Re:Bricked my router.
2021-10-19 15:19:40

@Kevin_Z As far as I know to flash the firmware the router needs to be reset.But in my case the router is not getting into reset mode.Even after holding the reset button for more than 30 seconds all the leds kept glowing and nothing noticable happened.Correct me if I am wrongly doing anything.

  0  
  0  
#9
Options
Re:Bricked my router.
2021-10-20 03:47:57

@RAKA 

 

What's the model number of the TP-Link router? If it is Archer C8, You can follow the User Manual to reset it, press and hold the reset button for more than 5 seconds to reset the router to its factory default settings. No need to press the button for as long as 30 seconds.

 

If the reset process cannot be finished by pressing the reset button, nor can you login to its web management page to restore it, you may contact the local tech support to ask if they have other suggestions.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#10
Options

Information

Helpful: 0

Views: 2540

Replies: 8

Related Articles
Router Bricked
449 0
TpLink bricked router
9843 0
Bricked my router after installing openWRT firmware
679 0
TL-WR840N Got bricked
5830 3
Bricked router recovery
1448 0
BRICKED ROUTER
490 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.