Hi Everyone!

I have a mesh net consisting 3x Deco M5 and I'm pretty satisfied with it. But I have one major issue with it - sometimes the devices connected with my Wi-Fi mesh are connecting to Deco with the weaker signal strength and that's a problem! Then the transfer speed drastically goes down - that's obvious. For example: I have Deco's located in my office (main Deco - connected by ethernet to main fiber router/gate), then in the kitchen and then in living room where I have Smart TV. Both the living room's Deco and kitchen's Deco are connected to my main Deco (office). However the kitchen's Deco has a weaker signal than living room's Deco, and here what is happening. Sometimes I see weird things (regardlessly the band [2.4 or 5GHz])  - like the Smart TV is connecting with the kitchen's deco instead living room's deco with a stronger signal.  For example: Sometimes the devices from my office are connected to the living room's deco or even kitchen's deco instead office's deco which is the strongest signal for them. 

So I highly demand and ask to add a possibility to the software (and firmware) to assign by MAC adress the specific device to the selected Deco - to avoid annoying switching connection between different Decos. For example: I want the "Smart LED lamp" to always connect with the Office's Deco and I can assign the device by uniqe MAC Adress to specified Deco - and the other Decos don't allow the "Smart LED lamp" to connect to them. 

I hope you understand what I mean. I have tried many configurations, even switching off the "MESH" button alongside some devices but it does not seem to work - devices are still sometimes switching between the Decos.

Best regards, Jack!