Deco needs able to change wifi channel
Hi,
looks like Deco has problem with auto choose channel, and sit on most used channel what exist on my location.
But whas i unexpected, that isnt possible to change chanel. I never saw this before on any device.
This should be priority, to allow user change chanel.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello all, sorry to respond late.
We have already noted all of your requests about choosing the wireless channels manually on the Deco system and they have been forwarded to the developers, they will publish new official firmware in the near future, not too long to wait, which will optimize the current channeling picking mechanism, it is suggested to wait for the new updates and confirm if that will help address any of your concerns.
I will try to explain why we don't give the Deco administrator the permission to manually choose a channel on the current Deco system, which may not precise but I will try my best:
Firstly, we need to clarify that the wireless channels on the current Deco firmware are not manually configurable as Deco automatically selects a 2.4GHz channel to use based on what it sees around it, selecting the channel that has the least interference. The 5GHz channel appears to be configured based on the region the device was manufactured for use in and they are apparently not auto-selected and are definitely not manually configurable.
Secondly, we need to reiterate what is the point of having a whole mesh Wi-Fi system in your network. The whole point of mesh networks is to give a seamless, unfettered, and performant experience for wireless networking, and thus a mesh network is "self-configuring" and "self-healing", the network automatically incorporates a new node into the existing structure without needing any adjustments manually by a network administrator and it automatically finds the fastest and most reliable paths to send data. If you change the wireless channel on the Deco nodes manually, it may give you the risk of losing the other Deco nodes and thus ruin your Deco system, you may need to start over again to reconfigure them.
What's more, it is not always easy to choose a clear wireless channel in your networks, you may need to test with all of them in order to find one that may be usable. Most importantly, crowded isn’t the same as busy, even though some channel scanning apps tell you one specific channel is busy, they don’t always measure other sources of congestion and interference. Non-Wi-Fi signals (like those from microwaves, Bluetooth devices, cordless phones, garage door openers, baby monitors, etc.) can all congest a channel but may not show up in a scan. So it’s possible that a channel can appear empty, while it is, in fact, saturated with other kinds of interference.
Last but not least, other mesh systems such as Google Wi-Fi mesh (update here that Netgear Orbi is not the same mesh as Deco, Orbi is more like a router + an RE, so if we misunderstood it previously, we are sorry for that), don't allow users to change the channel manually either, which means when developing a mesh system, our developers have already taken all factors into serious consideration and choose the current one, the current Deco mesh system may not be perfect or even good, but we don't think it's just that awful or nonusable as some of you thought. If we need or we must do this change to allow you to change the channel, it will require a lot of research in the market and it is not that easy just like you said "just open the option", I think most users like you guys should understand it.
Hopefully, that answers your question but let us know if you need more details.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@airlock303 Same thing on 5G. Deco is choosing the WORST channel.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
only if i knew this when i bought the device i would have chosen another brand
- Copy Link
- Report Inappropriate Content
Look at this.. looks that isn't able to work correctly.
- Copy Link
- Report Inappropriate Content
@Hama People have been complaining about this for more than a year. It is completely unacceptable that TP-Link hasn't fixed this.
- Copy Link
- Report Inappropriate Content
@JDC +++
I have exactly the same need! It is not acceptable not to be able to change channels, unless the system does its job of selection well.
Since the channels are poorly chosen, leading to cuts, it is required that the channels can be changed manually, as this is what all other brands do.
If you do not find a solution, the product is therefore bad and I will ask the brand to change the product for me with the minimum of acceptable settings!
- Copy Link
- Report Inappropriate Content
JDC wrote
@Hama People have been complaining about this for more than a year. It is completely unacceptable that TP-Link hasn't fixed this.
https://community.tp-link.com/en/home/forum/topic/163064
https://community.tp-link.com/en/home/forum/topic/204998
- Copy Link
- Report Inappropriate Content
Information
Helpful: 31
Views: 10306
Replies: 33