RE200 can’t find my 5g.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE200 can’t find my 5g.
From any other device I can see my 5g network but not from RE200 to expand it.
Now is very close to the modem/router so is not a distance/signal problem.
in fact ,from the RE200 I can find another 5g networks farther than mine and from the same ISP.
My ISP is VTR from Chile and the modem/router is an Arris.
Please, if you need more information, just let me know.
Thank you so much.
Modem | Arris TG2492LG | |
Serial Number | AAAP80635789 | |
Bootcode Version | 4.2.0.45 | |
Hardware Version | 10 | |
Firmware Version | 9.1.103DV14 | |
|
||
Basic Setup | 2.4 Ghz | 5 Ghz |
Enable Wireless | Check | Check |
Wireless Network Name (SSID) | Not relevant | Not relevant |
Broadcast Network Name (SSID) | Check | Check |
Tx Power Level | High | High |
Channel | Auto | Auto |
AP Isolation | Uncheck | Uncheck |
Enable WMM | Check | Check |
WMM Power Save mode | Check | Check |
Security Mode | WPA/WPA2-PSK (TKIP/AES) | WPA/WPA2-PSK (TKIP/AES) |
Pre-Shared Key | Not relevant | Not relevant |
Advance Setup | ||
Wireless Mode | B/G/N mixed | A/N/AC mixed |
BG Protection | Uncheck | Doesn't appear |
Beacon Interval | 100 | 100 |
DTIM Interval | 1 | 1 |
RTS Threshold | 2347 | 2347 |
Fragment Threshold | 2346 | 2346 |
Frame Burst | Check | Check |
Enable Radio | Check | Check |
Band Steering | Doesn't appear | Uncheck |
Enable DFS | Doesn't appear | Uncheck |
Enable DCS | Uncheck | Doesn't appear |
Select best channel manually | Uncheck | Doesn't appear |
802.11n Specific Settings | 802.11n/ac Specific Settings | |
Operation Mode | Mixed Mode | Doesn't appear |
Channel Bandwidth | 20 Mhz | 20/40/80 Mhz |
Guard Interval | Auto | Auto |
1 Accepted Solution