Home Network Community > All Threads > Archer AX1500 issue "WAN port is unplugged"
< All Threads

Archer AX1500 issue "WAN port is unplugged"

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX1500 issue "WAN port is unplugged"

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX1500 issue "WAN port is unplugged"
Archer AX1500 issue "WAN port is unplugged"
2020-05-24 10:13:59 - last edited 2020-05-24 10:15:19
Model: Archer AX1500  
Hardware Version: V1
Firmware Version: 1.0.7 Build 20191206 Rel. 8935(4555)

Hi,

I have bought this new router instead of my old one. 

When I connected Internet cable to WAN (blue) port in the router, then after a little time it said "WAN port is unplugged" and led status is "Orange". Then I thought it must be an ISP issue and I put the cable in my old router, everything worked fine. Also everything worked fine when I plugged the cable directly to my PC.

Then I tried to clone old router MAC address - still nothing.


Then I tried to connect my new router WAN port with old router LAN port and then everything worked perfectly(Internet led was Green). It looks like WAN port is working.

 

What can I else try to do? Or it's a warranty case?


Thanks,
Nick

  0      
 
  0      
 
#1
Options
3 Reply
Re:Archer AX1500 issue "WAN port is unplugged"
2020-05-24 13:32:35

@Nick2019 

 

Have you already tried to set the "Internet Port Negotiation Speed" to a fixed mode, instead of "Auto Negotiation"? Perhaps even try 100 Mbps if 1000 Mbps doesn't work.

 

  0  
  0  
#2
Options
Re:Archer AX1500 issue "WAN port is unplugged"
2020-05-24 14:02:55

@Nick2019 

 

Have you log into the router web/management interface and setup the router, Internet parameter, to match that of the old router? Was any quick installation or user guide manual follow? From the router management interface, what was display or the status under Internet on the new router versus old router?

 

  1  
  1  
#3
Options
Re:Archer AX1500 issue "WAN port is unplugged"
2020-05-25 06:11:59

@Nick2019 

Thank you all for your feedback.

No the issue is solved.

 

The solution is: in the router I had to choose ports speed as "100MB full duplex". After it router received Internet IP address.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 4184

Replies: 3

Related Articles
WAN port unplugged issue
658 0
TPLINK ARCHER C6 SHOWS WAN PORT UNPLUGGED
1785 0
Port forwading through AX1500
218 0
WAN port unplugged
1977 0
Wan port unplugged
899 0
Archer C6 WAN port unplugged
2383 6
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.