Not getting speed in RE205

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Not getting speed in RE205

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Not getting speed in RE205
Not getting speed in RE205
2020-05-24 15:20:50 - last edited 2020-10-14 01:36:06
Model: RE205  
Hardware Version: V1
Firmware Version: 1.1.1 Build 20171218 Rel. 50791

I have connected my RE-205 with LAN and operation Mode is Access Point.

When I connect the LAN to laptop and check speed, I am getting approx 200mbps. But when I connect the LAN to wifi and check speed on laptop via wifi standing next to it, I don't get it more than 70mbps.

I have tried both 2.4 Ghz and 5 Ghz, changed the wifi channel to unique so that it doesn't overlap. Tried all the encryption, even no encryption, still no improvement.

The laptop have gig ethernet and wifi cards.

 

Please advise how can I get the maximum speed.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Not getting speed in RE205-Solution
2020-10-14 01:36:00 - last edited 2020-10-14 01:36:06

@Julius_R 

Good day,

Thank you very much for your time and patience.

May I know the hardware and firmware version of RE205?

Did it also work as the access point mode?

If yes, since RE205 has 1 x 10/100M Ethernet Port (RJ45), so the maximum download speed would be limited to 100m/s;

While if it is on the range extender mode, there would not be such limitation.

 

Thanks a lot.

Recommended Solution
  1  
  1  
#5
Options
4 Reply
Re:Not getting speed in RE205
2020-05-28 11:56:17
Please check the Link speed on your PC when connect to RE205 wifi. It's 433Mbps on 5G wifi?
Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Not getting speed in RE205
2020-05-28 14:37:22

@Kevin_Z Yes It's 433 Mbps:

 

  0  
  0  
#3
Options
Re:Not getting speed in RE205
2020-10-13 15:28:25

@Alok_Mishra 

 

I too have the same issues , please provide some solution

 

  0  
  0  
#4
Options
Re:Not getting speed in RE205-Solution
2020-10-14 01:36:00 - last edited 2020-10-14 01:36:06

@Julius_R 

Good day,

Thank you very much for your time and patience.

May I know the hardware and firmware version of RE205?

Did it also work as the access point mode?

If yes, since RE205 has 1 x 10/100M Ethernet Port (RJ45), so the maximum download speed would be limited to 100m/s;

While if it is on the range extender mode, there would not be such limitation.

 

Thanks a lot.

Recommended Solution
  1  
  1  
#5
Options

Information

Helpful: 0

Views: 1976

Replies: 4

Related Articles