Unable to connect for 5GHz network using Deco M4

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Unable to connect for 5GHz network using Deco M4

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Unable to connect for 5GHz network using Deco M4
Unable to connect for 5GHz network using Deco M4
2020-05-31 17:03:44 - last edited 2020-05-31 17:45:46
Model: Deco M4  
Hardware Version: V2
Firmware Version: 1.16 Build 20190801 Rel. 59376

I've followed the instructions to set up carefully but Deco M4 cannot allow 5 GHz only to work with the Main Network or the Guest Network setting. Anyone has the same problem?

 

My LAN settings:

- Main Network: 2.4 GHz only

- Guest Network: 5 Ghz only

- Device Priority: 0 devices

- IPv4: Dynamic IP

- IPv6: Disabled

- Most of other settings are default.

- I put my devices very close to Deco M4 for the good connection.

 

Test devices:

- iphone 7 

- Macbook Pro early 2011. v10.11.6

 

Test case:

1 - The Macbook Pro connected the LAN cable to Deco M4; the download and upload speed is 938Mbps and 889 Mbps

2 - iphone 7 connected to the wifi Main Network. Download and upload speed is 72Mbps and 95Mbps.

* Guest network with 5GHz is never to be disappeared whether before or after reboot. 

 

 

 

 

 

  0      
  0      
#1
Options

Information

Helpful: 0

Views: 1298

Replies: 0

Related Articles