AX50/AX3000 5GHz wifi channel issue
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi there,
My Router does not stay on the designated 5Ghz channel. it keeps switching to channel 36.
It also does not stay on 160Mhz bandwidth. it auto switches to 80Mhz.
I have seen a few posts on this issue so i know im not the only one.
Is there a firmware or manual fix for this?
Thanks,
CS
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello,
Can you please show me the bottom label on your AX50, which shows the region and hardware version? We will soon check and confirm if we can provide you a beta firmware.
BTW, may I know what is your designated 5Ghz channel? As you know that both band 2 (52-64) and band 3 (100-140) are DFS channels. With DFS channels selected on the router, it will need to do a scan with a local radar all the time. If the selected DFS channel is occupied it will renegotiate to an open and non-DFS channel automatically.
This is not a product issue as all the Wi-Fi devices should obey the local laws and regulations.
Thanks.
- Copy Link
- Report Inappropriate Content
We know Band 4 Channel 149/153/157/161 which is the general channel for open .
But we can't see any band 4 channel on the select configuration,
Just Band1 and Band2(DFS)/Band3(DFS).
when AX50 auto jump to channel 149, we use analyse to scan all channel, it's very busy on 149.
can we free to select the channel on the configuration for band4 ?
Thanks!
- Copy Link
- Report Inappropriate Content
Please excuse me in case I misread you question, but you should be able to freely select channels 149, 153, 157, 161 as long as you have not set the "Channel Width" to 160MHz.
That is because channels 149, 153, 157, 161 cannot be used to form a 160 MHz wide channel.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello, may I know what is the region version of your AX50? If it is the AX50 EU version, it doesn't support band 4 channels (149, 153, 157, 161), which is designed to comply with that of CE regulation.
As for the unstable DFS channel issue, we will contact you via email to follow up, please check your email box and respond if you are willing to do further troubleshooting, thanks a lot~
- Copy Link
- Report Inappropriate Content
(As for the unstable DFS channel issue, we will contact you via email to follow up, please check your email box and respond if you are willing to do further troubleshooting, thanks a lot~)
count me in
us version
thank you.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kevin_Z Id like to know if there is current beta firmware as well. I seem to be having some QOS issues as of late. Its just pure luck at this point that even my wired devices get the internet speeds I pay for. Very frustrating.
- Copy Link
- Report Inappropriate Content
Hello, can you provide more details about the issue you encountered with the AX50, which will speed up the process? Thanks.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 9418
Replies: 23
Voters 0
No one has voted for it yet.