2 TP-Link WLAN repeaters in a row after fritz repeater

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

2 TP-Link WLAN repeaters in a row after fritz repeater

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
2 TP-Link WLAN repeaters in a row after fritz repeater
2 TP-Link WLAN repeaters in a row after fritz repeater
2020-08-08 07:08:26
Model: Adapter  
Hardware Version:
Firmware Version:

Hi togehter,

 

how can I switch 2 TP-Link WLAN repeaters in a row,  in series with a Fritz repeater?

One TP-Link WLAN Repeater works, the clients get an IP via DHCP from the Fritz! Box.

No IP is assigned to the 2nd TP-Link WLAN Repeater
FRITZ! Box -> FRITZ! WLAN Reapeter 2400 -> TP-Link 300Mps WLAN Repeater (TL-WA850RE) - TP-Link 300Mps WLAN Repeater (TL-WA850RE)

  1      
  1      
#1
Options
4 Reply
Re:2 TP-Link WLAN repeaters in a row after fritz repeater
2020-08-11 00:57:44

@FraBuc 

Good day.

Thank you for your patience.

Normally we do not recommend that three extenders are in a row.

If you set up all the SSID to be the same, they would be confused and sometime might become a loop.

So if possible, you could connect all 3 extenders wirelessly direct to the main Fritz Box router;

Or you could set up the last 850RE as an access point and connect it via cable to the first 850RE.

Thank you~

  0  
  0  
#2
Options
Re:2 TP-Link WLAN repeaters in a row after fritz repeater
2020-08-13 15:04:04

@Solla-topee 

 

Many thanks for your information.

But i cannot link via cable

do you had another idea?

 

 

 

best regards

Frank

  0  
  0  
#3
Options
Re:2 TP-Link WLAN repeaters in a row after fritz repeater
2020-08-18 06:25:52
Have you tried to set all 3 repeaters different SSID? and set them up all directly to the main router?
  0  
  0  
#4
Options
Re:2 TP-Link WLAN repeaters in a row after fritz repeater
2020-08-19 06:01:33 - last edited 2020-08-19 06:02:05

@FraBuc 

I have installed the newest Firmeware and now it works

  0  
  0  
#5
Options