Deco M9 Plus New firmware just released end of July 2020 - 1.4.2 BUILD 20200725 REL. 65637

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Deco M9 Plus New firmware just released end of July 2020 - 1.4.2 BUILD 20200725 REL. 65637

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco M9 Plus New firmware just released end of July 2020 - 1.4.2 BUILD 20200725 REL. 65637
Deco M9 Plus New firmware just released end of July 2020 - 1.4.2 BUILD 20200725 REL. 65637
2020-08-10 10:10:00 - last edited 2020-08-17 08:50:49
Model: Deco M9 Plus  
Hardware Version: V2
Firmware Version: 1.4.2 BUILD 20200725 REL. 65637

Hi 

 

I recently upgraded to 1.4.2 BUILD 20200725 REL. 65637 on 3 Deco M9 Plus units inside my house via Deco apps.... will test the performance sometime this week and let you all know. I just wondering what is the new change for this f/w ? I tried to look everywhere for the f/w logs but could not find it. Anyone have the same concern about this ? 

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Deco M9 Plus New firmware just released end of July 2020 - 1.4.2 BUILD 20200725 REL. 65637-Solution
2020-08-17 08:50:17 - last edited 2020-08-17 08:50:49

@ucheokeke 

 

Hello,

 

Thanks a lot for your kind suggestions and we will make it more clear in the Release Notes in future updates.

 

As per the latest 1.4.2 version, it actually improves the mesh system stability and enhanced security.

 

Good day.

Recommended Solution
  1  
  1  
#14
Options
16 Reply
Re:Deco M9 Plus New firmware just released end of July 2020 - 1.4.2 BUILD 20200725 REL. 65637
2020-08-10 14:58:58

@Ken12 Hi, I got the same message in my deco app. The strange thing is that i cannot find information about it. Did you installed it and found anything special/new?

 

I will wait with installing it before i know what it is for

 

 

  0  
  0  
#2
Options
Re:Deco M9 Plus New firmware just released end of July 2020 - 1.4.2 BUILD 20200725 REL. 65637
2020-08-10 15:01:51
I also installed 1.4.2 via the Deco app. Didn't notice any changes so far.
  0  
  0  
#3
Options
Re:Deco M9 Plus New firmware just released end of July 2020 - 1.4.2 BUILD 20200725 REL. 65637
2020-08-10 23:31:29

@deechte will this version work for v2.8?  I currently have firmware 1.2.12 Build 20191014 Rel. 42025

  0  
  0  
#4
Options
Re:Deco M9 Plus New firmware just released end of July 2020 - 1.4.2 BUILD 20200725 REL. 65637
2020-08-10 23:58:39

@Ken12 Just upgraded, so far so good. I'm hoping it resolves some of my dropout issues

  0  
  0  
#5
Options
Re:Deco M9 Plus New firmware just released end of July 2020 - 1.4.2 BUILD 20200725 REL. 65637
2020-08-11 06:35:32
Same here. I did update via the app and so far so good. Didn't notice any differences. First time I saw the app informing me of a new firmware release and that's good. Hope this means further update
  1  
  1  
#6
Options
Re:Deco M9 Plus New firmware just released end of July 2020 - 1.4.2 BUILD 20200725 REL. 65637
2020-08-11 08:08:04
Yah, I did updated to the latest f/w 1.4.2 BUILD 20200725 REL. 65637, So far so good, performance very good and more stables compare w previous update ver 1.4.0
  0  
  0  
#7
Options
Re:Deco M9 Plus New firmware just released end of July 2020 - 1.4.2 BUILD 20200725 REL. 65637
2020-08-11 08:09:35
This f/w ver 1.2.12 Build 20191014 Rel. 42025 which is old stock f/w shipped from TP link out of the box.
  0  
  0  
#8
Options
Re:Deco M9 Plus New firmware just released end of July 2020 - 1.4.2 BUILD 20200725 REL. 65637
2020-08-11 08:11:27
So far very stable and no dropout issues like previous f/w 1.4.0 also I notice some improvement of the performance, speed bump from 80 - 120 to 150 - 200 MPS ( I'm currently on 200 up/down w verzn fios )
  0  
  0  
#9
Options
Re:Deco M9 Plus New firmware just released end of July 2020 - 1.4.2 BUILD 20200725 REL. 65637
2020-08-13 14:35:47

@Ken12 

 

Like some of the others I upgraded to 1.4.2 as soon as I got the notice in the app. Upgrade was smooth as silk and completely automatic; far less cumbersome than the upgrade tool. All 3 units were done at the same time in less than 10 minutes (the way it should be). Everything is running fine since the upgrade.

I was not having stability issues with 1.4.0 so no difference there. I also looked closely through both the app and online web access and found NO changes in features or functionality from 1.4.0- not surprising for an update so soon after the previous one but still mildly disappointing. 

  0  
  0  
#10
Options
Re:Deco M9 Plus New firmware just released end of July 2020 - 1.4.2 BUILD 20200725 REL. 65637
2020-08-17 03:55:43 - last edited 2020-08-17 08:50:43

@Kevin_Z 

 

It would be useful if Tp-Link updates the changelog with details of what has changed.

 

The generic "improved performance, fixed bugs, security" statement does not give much surety for people to upgrade these days since many have been let down by more bugs after updating their devices, software, OS (and some updates are cumbersome to rollback)

 

 

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 5272

Replies: 16

Related Articles