Home Network Community > All Threads > Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5
< All Threads

Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5
Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5
2020-09-11 07:22:56 - last edited 2022-04-27 02:00:51
Model: Archer MR200  
Hardware Version: V5
Firmware Version: 1.0.0 0.9.1 v0001.0 Build 200511 Rel.42539n

@Sunshine Kindly reply

 

 

@Sunshine Kindly reply

Hi.

 

In this below link you have given the beta firmware for manual LTE network  band Selection upto Archer MR 200 V4.Kindly release the same for V5 too.Please put this on first priority..

I recently switched from Huawei to this router. The performance is horrible from Day 1. The router keeps switching from LTE band 1  and 40 and gets disconnected every time. Its very difficult to work in these times of Covid 19 when i have to work from home and i get disconnected every 2 mins because of band switching. Please suggest a way out of this, otherwise, customers like me will go back to Huawei as that performs seamlessly against these conditions.Without this function, this router perform so badly that sharing hotspot via smartphone yield similar result.  This is quite Urgent!!!! Can we at least get a Beta version like how it was given for MR200 v4 in the below post.

Because offcial firmware would take months to release.So kindly release beta firmware for V5 version as you did for V4

 

PS:I had other no other option other than returning the router back to the Flipkart,If i did not get beta firmware.

Please understand my situation My  router  Is slower than my mobile hotpsot due to auto band switching. i am not able to use the router at all for work from home

 

 

KIndly forward the mail to your Global HQ team too and give beta fimware for archer MR 200 V5 asap

 

 

Forum Thread  which has release Beta firmware for- Archer MR 200 V4:

https://community.tp-link.com/en/home/forum/topic/166506?page=1

 

https://static.tp-link.com/2020/202007/20200714/LTE_GATEWAYv3_1.11.0_0.9.1_up_boot(200325)_2020-06-12_15.48.55.zip  

  13      
 
  13      
 
#1
Options
1 Accepted Solution
Re:Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5-Solution
2020-09-17 08:13:27 - last edited 2022-04-27 02:00:51

@anban 

Update:

please refer to this link to get the firmware of Manual Band Selection on 4G WiFi Routers:

[Solution] Manual Band Selection for 4G WiFi Routers

 

If you are not sure about how to select the band manually on the router web interface, check the instructions below:

How to select 4G band manually on the web interface of LTE Gateway Routers?

 

Thank you very much.

Best regards,

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
19 Reply
Re:Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5-Solution
2020-09-17 08:13:27 - last edited 2022-04-27 02:00:51

@anban 

Update:

please refer to this link to get the firmware of Manual Band Selection on 4G WiFi Routers:

[Solution] Manual Band Selection for 4G WiFi Routers

 

If you are not sure about how to select the band manually on the router web interface, check the instructions below:

How to select 4G band manually on the web interface of LTE Gateway Routers?

 

Thank you very much.

Best regards,

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5
2020-10-29 04:19:46

@Sunshine 

 

I'm also using MR200 V5...
This is quite Urgent ! kindly release beta firmware for V5 version that will support modification between LTE Bands...

  0  
  0  
#3
Options
Re:Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5
2020-10-30 12:49:33

@anban @Sunshine Same Requirement

  0  
  0  
#4
Options
Re:Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5
2020-11-06 06:02:43

@anban @vmliman @Satishkmr 

Hello, firmware already sent and sorry for the delay.

Please feel free to post here with further updated news.

Thanks a lot.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  1  
  1  
#5
Options
Re:Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5
2020-11-08 07:54:51

@Sunshine 

 

Thanks for the information, but does it really support band selection, ?

 

I am not getting any band selection option with latest update...

 

I have latest firmware version -

1.0.0.0.9.1 v0001.0 Build 200511 Rel.42539n

  0  
  0  
#6
Options
Re:Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5
2020-11-18 18:16:44

@anban I've installed the FW beta version for MR200 V5 found here:
https://community.tp-link.com/en/home/forum/topic/166506
 

Now in Advanced->Network->Internet iI'm able to select the band.


I get the max speed whit Band 3 and i selected this one.

 

  3  
  3  
#7
Options
Re:Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5
2020-11-19 11:40:19

@fortless 

 

Good to know that the beta firmware helped, please kindly pay more attention on this issue and we will soon release an official version, thanks a lot.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options
Re:Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5
2020-11-30 15:11:26 - last edited 2020-11-30 15:12:02

@Kevin_Z

 

when do you release new firmware for MR200 V2 ? Is it hardware problem with TP-Link ? Really bad to not let us choose band, or at least better handover.

  1  
  1  
#9
Options
Re:Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5
2020-12-01 05:59:59 - last edited 2020-12-01 06:00:33

@4g_lte 

 

Hi, thanks for asking. MR200 V2 is actually quite an old hardware and we cannot make certain we will release new firmware for it. It is suggested to keep an eye on the official website by yourself.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#10
Options
Re:Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5
2020-12-01 15:06:54

hi

 

i have the same request

 

i have the MR200(EU) v2.1 How can i upgrade the firmware to be able switch between 4G bands ?

 

  1  
  1  
#11
Options
12

Information

Helpful: 13

Views: 7758

Replies: 19

Related Articles
Very Urgent-Requesting new Beta firmware for switch between 4G bands on Archer MR200 V5
1309 2
AX50 - New / Beta Firmware ?
1451 0
Kevin_Z, requesting beta firmware to fix AX50 DFS channel issue
2072 0
Beta firmware file not uploading
709 0
TPLINK VR600 V2 NEW Firmware or New Beta Firmware
1431 3
Beta Firmware
5251 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.