Home Network Community > All Threads > Set up Deco M4 to Share One Internet Connection With Two Private Networks
< All Threads

Set up Deco M4 to Share One Internet Connection With Two Private Networks

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Set up Deco M4 to Share One Internet Connection With Two Private Networks

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Set up Deco M4 to Share One Internet Connection With Two Private Networks
Set up Deco M4 to Share One Internet Connection With Two Private Networks
2020-10-20 12:35:50 - last edited 2020-10-21 13:42:59
Model: Deco M4  
Hardware Version:
Firmware Version:

I want to setup my Deco M4 in a way that it creates 2 (or 3) private and seperate networks. Can I establish this by connecting each Deco unit in router mode directly to the central modem/router? Should this be wired or can it be done wireless. Each network should have a different ssid and password setting so that there is no connection between the networks. Or would it be a better solution to set the Deco units in Access Point mode and connect a router after each Deco unit to create a private network?

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Set up Deco M4 to Share One Internet Connection With Two Private Networks-Solution
2020-10-20 15:03:09 - last edited 2020-10-21 13:42:59
I think you can do this in the app by selecting your first network at the top of the app and from the dropdown select something like "create a new network". I haven't tried it for myself though...
Recommended Solution
  3  
  3  
#2
Options
3 Reply
Re:Set up Deco M4 to Share One Internet Connection With Two Private Networks-Solution
2020-10-20 15:03:09 - last edited 2020-10-21 13:42:59
I think you can do this in the app by selecting your first network at the top of the app and from the dropdown select something like "create a new network". I haven't tried it for myself though...
Recommended Solution
  3  
  3  
#2
Options
Re:Set up Deco M4 to Share One Internet Connection With Two Private Networks
2020-10-21 08:06:14 - last edited 2020-10-21 13:42:56

@HatO 

 

Hello,

 

As Ed-win suggested, you can create different Deco networks by connecting each of them to the front-end modem router directly with cables and configure them into router mode, all the Deco networks will be independent. Below is the setup instruction you may refer to:

https://www.tp-link.com/support/faq/2295/

 

Nice day.

Check What's Currently Going on With Deco Deco Early Access Firmware Open for Test! Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  1  
  1  
#3
Options
Re:Set up Deco M4 to Share One Internet Connection With Two Private Networks
2020-10-21 13:43:43
Great. I will try that!
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 2150

Replies: 3

Related Articles
Deco m4 set up
2644 0
Deco M4 set up on KCOM
821 2
Deco M4 constantly drops internet connection
10216 1
Slow internet on one M4 Deco
542 0
Deco M4 and M4R in one network
390 0
Deco M4 - No Internet connection
1548 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.