Archer c6 can't login after firmware update
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Today I make a firmware update. Since the update I can't log in...my password, nor default password work's....
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, if you cannot login to the web management page of the C6, please check the below:
1. Ensure that your device has connected to the router either by an Ethernet cable or by wireless.
2. Open a web browser and enter 192.168.0.1 or tplinkwifi.net in the address bar and give it a go.
3. Otherwise, please check the default gateway of your device and use it to access the internet: https://www.tp-link.com/faq-838.html
4. Meanwhile, you can use different web browsers and devices to access.
5. Besides, you can try to reset the router and login with the default username and password.
Here is an instruction you can refer to https://www.tp-link.com/en/faq-2236.html
May this help.
- Copy Link
- Report Inappropriate Content
Hi, thanks for getting back.
Try to reset the TP-Link account password and confirm.
If that still doesn't work, reset the C6 to factory defaults and reconfigure it from scratch, then link it to the TP-Link account again.
Good day.
- Copy Link
- Report Inappropriate Content
Hello, if you cannot login to the web management page of the C6, please check the below:
1. Ensure that your device has connected to the router either by an Ethernet cable or by wireless.
2. Open a web browser and enter 192.168.0.1 or tplinkwifi.net in the address bar and give it a go.
3. Otherwise, please check the default gateway of your device and use it to access the internet: https://www.tp-link.com/faq-838.html
4. Meanwhile, you can use different web browsers and devices to access.
5. Besides, you can try to reset the router and login with the default username and password.
Here is an instruction you can refer to https://www.tp-link.com/en/faq-2236.html
May this help.
- Copy Link
- Report Inappropriate Content
Thanks for quick answer.
Login via web browser work's correctly, but tether app fail to login even if I type in correct password...
- Copy Link
- Report Inappropriate Content
Hi, thanks for getting back.
Try to reset the TP-Link account password and confirm.
If that still doesn't work, reset the C6 to factory defaults and reconfigure it from scratch, then link it to the TP-Link account again.
Good day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1957
Replies: 3
Voters 0
No one has voted for it yet.