pa8030p tv disconnects when adding pc

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

pa8030p tv disconnects when adding pc

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
pa8030p tv disconnects when adding pc
pa8030p tv disconnects when adding pc
2020-12-05 15:51:13 - last edited 2020-12-05 15:54:11
Model: TL-PA8030P KIT  
Hardware Version: V3
Firmware Version: 200117

Hi!

 

I have a setup with a TV box, a computer and a raspberry-py all connected to a tplink switch with IGMP that works fine with a old D-Link powerline, but it's slow.

 

Just bought 2 PA8030P to upgrade the speed and stored the D-links.

 

If I only watch TV it works perfectly. If I turn on the computer or the raspberry, the TV starts hanging and dropping connectiion.

 

The computer and the raspberry always work fine, wether the TV box is on or not.

 

 

So, the problems only start when I connect something else to the same PA8030p (which has 3 ports, by the way). Also tried removing the tplink switch out of the equation with the same results.

 

 

My guess is the IGMP multicast starts confusing itself when I connect the computer or the raspberry py. The PA8030p doesn't support IGMP?

 

Thanks!

  0      
  0      
#1
Options
6 Reply
Re:pa8030p tv disconnects when adding pc
2020-12-08 13:09:38 - last edited 2020-12-08 13:10:05

@Rafs 

Hi, could you please help me confirm the following information:

1. If the only TV connected to the TL-PA8030P, there is no problem, right?

 

2. Could you please draw a simple map about how all the things are connected to each other, from the router to the TV, like a router—switch—TL-PA8030P~~~powerline~~TL-PA8030P—PC/TV/ raspberry?

As for the IGMP, since there isn't any information related to the user guide and please wait for a moment, let me double-check with the senior engineers and come back here.

 

Thank you very much!

  0  
  0  
#2
Options
Re:pa8030p tv disconnects when adding pc
2020-12-08 14:57:17

1. If the only TV connected to the TL-PA8030P, there is no problem, right?

That is correct.

 

2. simple map

 

internet router and powerlink on the left;

connected through eletricity cable to other powerlink on the right;

itself connected to a tv, pc and raspberry

 

  0  
  0  
#3
Options
Re:pa8030p tv disconnects when adding pc
2020-12-18 05:40:32

@Rafs 

Thank you very much for your detailed information.

We would like to forward your case to the senior engineers for further assistance.

Please have a check of your email box later.

Thanks a lot.

 

 

 

  0  
  0  
#4
Options
Re:pa8030p tv disconnects when adding pc
2020-12-27 15:52:41

@TP-Link any update on this? Or any other TP-Link device that would work with a tv box and a pc?

  0  
  0  
#5
Options
Re:pa8030p tv disconnects when adding pc
2020-12-30 07:58:54

@Rafs 

Hi, Sorry for the delay.

The powerline adapters supported IGMP v2.

As for the IGMP V3, it might have some problem.

So do you know which one did you use?

 

Thank you very much for your time and patience.

  0  
  0  
#6
Options
Re:pa8030p tv disconnects when adding pc
2021-01-06 14:46:59

@TP-Link I don't know the version of the IGMP. But a old D-link powerline works fine, it has 7 years. Don't know if it helps.

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 663

Replies: 6

Related Articles