Home Network Community > All Threads > Archer MR600 v2 manual band selection giving error code:89534 no available band
< All Threads

Archer MR600 v2 manual band selection giving error code:89534 no available band

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123

Archer MR600 v2 manual band selection giving error code:89534 no available band

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer MR600 v2 manual band selection giving error code:89534 no available band
Archer MR600 v2 manual band selection giving error code:89534 no available band
2021-03-05 13:39:11 - last edited 2022-09-01 11:26:36
Model: Archer MR600  
Hardware Version: V2
Firmware Version: 1.2.0 0.9.1 v0001.0 Build 201203 Rel.59032n

Hi,

 Please help me. how to manually select band. Because its keep on toggling from 4g+ to 4g network.

  2      
 
  2      
 
#1
Options
1 Accepted Solution
[Solution] Archer MR600 v2 manual band selection giving error code:89534 no available band-Solution
2021-11-09 03:31:42 - last edited 2021-11-18 08:37:13

@StrikerRon 

Hi, As the error code 89534: no available band when you try to manually select the LTE bands on 3G/4G routers, here are useful suggestions shared by our users.


1. If you are using external antennas, such as LPDA and OMNI type, please pay attention to the LTE frequency of the external band since they might be out of the LTE frequency range on 3/4G routers, and please try to select LTE bands under the original antennas.
like #5 Jprathap mentioned here:

 

2. Turn off mobile date under Basic>internet>mobile data or Advanced>network>internet>mobile data; then try to select the LTE bands again.

like #21 mib896 suggested here:


3. If your LTE gateway(like MR150 v2) does not support manual band selection yet, please install the beta firmware on this link:

[Solution] Manual Band Selection for 4G WiFi Routers

 

4. If your issue actually is: Archer MR600 V2 was working before, then after a reboot, it cannot use the 4G network anymore.
Under 4G preferred mode, it only connects to WCDMA which is a 3G network(if the carrier doesn't support 3G anymore, the internet will not work). When trying to change Network Mode to 4G Only and save it, Error Code 1: Internal Error pops up, Besides, when searching 4G band manually, it shows "error code：89534 no available band"

Please refer to the solution on this link:

[Solution] No connection in 4g after reboot

 

While in case your case is related to neither of them, please feel free to start a new thread with more details about your issue!

Thank you very much.

 

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
Recommended Solution
  0  
  0  
#25
Options
30 Reply
Re:Archer MR600 v2 manual band selection giving error code:89534 no available band
2021-03-08 05:00:50 - last edited 2021-03-09 04:18:58

Same issue here. Any help would be much appreciated.

 

  0  
  0  
#2
Options
Re:Archer MR600 v2 manual band selection giving error code:89534 no available band
2021-03-09 04:20:18 - last edited 2021-03-11 09:33:07

in Airtel i can manually select bands. getting error code on jio network.

  0  
  0  
#3
Options
Re:Archer MR600 v2 manual band selection giving error code:89534 no available band
2021-03-09 08:27:48

@Jprathap 

Can I have a picture of the error message?

If possible, could you please send me a picture of the advanced>status page, and please also send the system log to me;

If putting the JIO sim into the mobile phone, could it stay on 4G+?

Thank you very much.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#4
Options
Re:Archer MR600 v2 manual band selection giving error code:89534 no available band
2021-03-10 05:07:09

@TP-Link HI, please check your mail I shared all required things.

  0  
  0  
#5
Options
Re:Archer MR600 v2 manual band selection giving error code:89534 no available band
2021-03-10 11:28:18 - last edited 2021-03-10 11:29:06

@TP-Link Getting same problem with jio sim.

"Error code: 89534 No available band"

 

My router - TL-MR6500v

 

Here is a screenshot (valid for a week or so)

https://paste.pics/f493e415ec7df29a6cb961373df2e364

 

Selecting band is important for LDPA antenna ! Please fix

  0  
  0  
#6
Options
Re:Archer MR600 v2 manual band selection giving error code:89534 no available band
2021-03-10 16:42:34

@NetNerds  Same here, @TP-Link Can you please fix, we can't change our network for a router malfuntion

  0  
  0  
#7
Options
Re:Archer MR600 v2 manual band selection giving error code:89534 no available band
2021-03-11 09:32:24 - last edited 2021-11-18 08:16:09

Hi all,

   I sorted out the issue. actually the tp-link router does supports manual band selection on jio network. But whoever using external antenna like LPDA and OMNI type. check the operational frequency range of the antenna.

 

  In my case i have LPDA 12dbi external antenna which supports 698-2700MHz range of frequency and in jio network 4G+ CA, downlink frequency is 2310MHz and uplink frequency is 3874.10MHz. that is why we cannot able to select the bands manually.  If i check the same with default tp_link antenna i can able to select the bands. I tried and its working.

 

 

Tips to check UL and DL frequency: insert the sim on your android mobile and place your mobile at 4G+ stable network area. install cellular-pro app from play store it will help you to find the frequency range of your ISP network.(LTE-->cell params--> frequency DL/UL(mhz) ). 

 

 

@TP-Link  no replies from you and your team. Hope atleast in future you guys able to help me fix the issue on time.

 

  3  
  3  
#8
Options
Re:Archer MR600 v2 manual band selection giving error code:89534 no available band
2021-03-11 12:56:16

@Jprathap Awesome, I have gone ahead and tested with ABONIX 4G LTE External Barrel Antenna, it is working.

 

So, external antenna is working but there is a simple way of accessing.

 

Step 1 - Disconnect your Internet every time you are going to search the Band.

 

Step 2 -  Try searching the band, sometimes you may need to move it to auto or manual and search again.

 

Now, here is the best part :

 

Do not select a single band, select all. Since, the time I have selected all the bands I'm getting amazing speed.

 

 

Latest Speed test results (taken after above stats) - Manual band

 

 

 

 

 

Automatic Band - Speed test results

 

 

 

 

 

Final test, putting it on Manual band (Working only when Mobil data is disabled and then search)

 

 

 

 

Signal Decreased

 

 

 

  5  
  5  
#9
Options
Re:Archer MR600 v2 manual band selection giving error code:89534 no available band
2021-06-12 17:06:53

@Jprathap 

No manual band selection even after connecting 12 dBi barrel antenna from abonix.

Same error code  - 89534 no available band.

  0  
  0  
#10
Options
Re:Archer MR600 v2 manual band selection giving error code:89534 no available band
2021-06-15 03:07:26

@Jprathap even I am also facing some problem plz help me

  0  
  0  
#11
Options
123

Information

Helpful: 2

Views: 11183

Replies: 30

Related Articles
Archer MR600 v2 manual band selection in Jio Sim giving error code:89534 no available band .
1679 0
Archer MR600 V2 LTE Manual Band Selection?
11363 3
i want to enable band selection in my archer MR600 V2
9546 8
Archer MR600 V2 Carrier Aggregation & Band Selection
24933 15
Archer MR600 V1 LTE Manual Band Selection?
1437 2
Archer MR600 4G Band Selection issue
1514 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.