Advice on Wifi Range Extender

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Advice on Wifi Range Extender

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Advice on Wifi Range Extender
Advice on Wifi Range Extender
2021-05-03 13:05:30
Model: RE205  
Hardware Version:
Firmware Version:

Hi,

 

I am looking for advice on choosing the best wifi range extender/booster to help with an issue I am experiencing.

My home wifi and internet access is provided via a Virgin Media Superhub 3.0.

Wifi performance is not great but up until now has been adequate from the superhub.

I have one particular device (Brennan B2) which is proving very sensitive to the strength of the wifi signal in order to fully function so need an (inexpensive) solution that will boost the signal in the vicinity of this device.

I require the B2 to have a fixed IP address so that I can see it as NAS device.

The B2 uses DHCP to pick up its IP address and it is not possible to configure it with a static address so currently I reserve an IP address on the Virgin superhub so that I do not have to fiddle with the NAS settings on my PC.

I know that most wifi extenders effectively create a new local subnet, broadcast new SSIDs to enable local connection of devices, act as a local DHCP server to allocate IP addresses to the local devices, and forward traffic to/from the primary router including internet access.

My questions are :

1. Can I disable DHCP server functionality on TPLink extenders so that DHCP server functionality defaults to my Virgin Superhub ?  This would allow me to use my existing home subnet and IP address reservation.

Do I need to do any special configuration of the Virgin hub to enable it to complete the DHCP dialogue via the extender (DISCOVER/OFFER/REQUEST/ACK) ?

2. If (1) is not possible can I reserve an IP address for a specific MAC address by configuring the TPLink extender ?

 

Note that I don't want to replace the router functionality of the virgin hub with a 3rd party router (i.e. use the Virgin hub only as a cable modem) , nor run a wired connection the Brennan B2.

Thanks


 

  0      
  0      
#1
Options
1 Reply
Re:Advice on Wifi Range Extender
2021-05-07 07:11:44

@jfbuk Good day, 

 

If you use Brennan B2 at a fixed location most of the time, range extender should be able to work for you.

1.  tp-link range extender uses a smart DHCP , when it detects router's DHCP server, it will turn off its own DHCP server automatically. 

And router will assign the IP address for the devices that connected to range extender, this could be done in RE basic set up process. 

 

2.  If B2 is at a certain location and always connected to RE 's network, reserving an  IP address is possible.

Reserving an IP address for a client is also done on main router, but Range extender will create a virtual MAC address for the clients behind it (which looks similar to device real MAC ), so when B2 is connected to RE, you will see a virtual MAC on router's client list, please reserve IP for that virtual MAC address. 

When B2 connects to router's network , you will see the real MAC on router and the IP reservation for virtual MAC will be invalid. 

 

Hope this could help~

 

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 633

Replies: 1

Related Articles