Home Network Community > All Threads > TP Link as a Secondary Router Not Getting Full Speed
< All Threads

TP Link as a Secondary Router Not Getting Full Speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP Link as a Secondary Router Not Getting Full Speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP Link as a Secondary Router Not Getting Full Speed
TP Link as a Secondary Router Not Getting Full Speed
2021-05-12 06:01:27 - last edited 2021-05-13 06:28:30
Model: Archer C24  
Hardware Version: V1
Firmware Version: 1.4.3 Build 201022 Rel.55840n(5553)

I have a main router and secondary router setup (LAN-to-WAN).

 

The main router is a LinkSys Router that provides the paid speed of 150 Mbps with PLDT. This has been set to Factory Settings - WiFi settings have been configured. My desktop in my room was initially connected to one of the LAN ports - which in turn is getting the full 150 Mbps.

 

The second router is this TP-Link Archer C24. Currently, it is using the ethernet cable initially connected to my desktop. However, it is only distributing up to 90 Mbps of speed. It is in Access Point mode - so no secondary DHCP server.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:TP Link as a Secondary Router Not Getting Full Speed-Solution
2021-05-13 06:28:24 - last edited 2021-05-13 06:28:30

@Ouja 

 

The Archer C24 has 100mbps WAN/LAN ports, that is going to be a bottleneck for you, it would be better to upgrade to something with a 1 GB port if you get a speed of more than 100Mbps:

https://www.tp-link.com/home-networking/wifi-router/archer-c24/#specifications

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:TP Link as a Secondary Router Not Getting Full Speed-Solution
2021-05-13 06:28:24 - last edited 2021-05-13 06:28:30

@Ouja 

 

The Archer C24 has 100mbps WAN/LAN ports, that is going to be a bottleneck for you, it would be better to upgrade to something with a 1 GB port if you get a speed of more than 100Mbps:

https://www.tp-link.com/home-networking/wifi-router/archer-c24/#specifications

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:TP Link as a Secondary Router Not Getting Full Speed
2021-05-13 07:12:56

@Kevin_Z Yeah. I reviewed the specs sheet a little bit too late after I posted this. I even considered it might be my ethernet cable but it is Cat5e.

 

Thanks, Kevin. Atleast it is confirmed.

 

However, how is it advertising 433+ Mbps speed? Is this for the Extender mode?

  0  
  0  
#3
Options
Re:TP Link as a Secondary Router Not Getting Full Speed
2021-05-14 01:16:50

@Ouja 

 

433 Mbps refers to the maximum wireless link speed, that means your wireless device can negotiate to the 5GHz network at a maximum 433 Mbps. However, the actual speed you can get will still be limited by the incoming speed, which is limited by the WAN port.

 

To know more about the speed inquiries, please refer to this article:

https://www.tp-link.com/support/faq/2435/

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 1468

Replies: 3

Related Articles
TP Link Archer AXE75 as a Secondary Router Not Getting Full Speed
206 0
TP Link AC1200 Deco not getting full speed
984 0
Not getting full speeds from TP-Link Archer T9UH
6357 0
TP-Link Archer AX72 unreachable from secondary AP mode router
1434 0
not getting full speed in laptops
1071 0
Not Getting Full Speed with Extender
222 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.