Problems with Deco M9 Plus(US)_V2_1.5.5_210519

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Problems with Deco M9 Plus(US)_V2_1.5.5_210519

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Problems with Deco M9 Plus(US)_V2_1.5.5_210519
Problems with Deco M9 Plus(US)_V2_1.5.5_210519
2021-06-26 20:45:43 - last edited 2021-06-29 00:58:49
Model: Deco M9 Plus  
Hardware Version: V2
Firmware Version: Deco M9 Plus(US)_V2_1.5.5_210519

Since last update my download speed reduced a lot. I have 125 mbts and now with the Deco M9 Plus(US)_V2_1.5.5_210519 update it goes down to 2.

 

Will try downgrading my deco . updating soon

  0      
  0      
#1
Options
1 Accepted Solution
Re:Problems with Deco M9 Plus(US)_V2_1.5.5_210519-Solution
2021-06-28 14:58:33 - last edited 2021-06-29 00:58:49

@TP-Link so it wasn't a problem with the deco, it was with the modem. I only changed the Ethernet port from 1 to 2 in the modem and that's it. Problem solved. Thx 

Recommended Solution
  1  
  1  
#5
Options
6 Reply
Re:Problems with Deco M9 Plus(US)_V2_1.5.5_210519
2021-06-26 20:58:28
So It didnt work. Downgrade still down. If I connect my pc directly to the router it work ok. Strange thing that upload its ok. I already try as access point and still the same issue. Any advice?
  0  
  0  
#2
Options
Re:Problems with Deco M9 Plus(US)_V2_1.5.5_210519
2021-06-28 10:07:04

@Diego87 

 

After the firmware update, please reboot both Deco M9 Plus nodes by powering them off then on to confirm if the speed will be back to normal.

 

If it is not, please follow the guide here to check the settings on the network, especially the QoS settings:

[Troubleshooting] Slow Internet Speed with Deco Devices

  0  
  0  
#3
Options
Re:Problems with Deco M9 Plus(US)_V2_1.5.5_210519
2021-06-28 11:52:12

@TP-Link Same here. Reverted back to 1.5.3. 

 

 Stability and signal source with 1.5.5 very poor...

  0  
  0  
#4
Options
Re:Problems with Deco M9 Plus(US)_V2_1.5.5_210519-Solution
2021-06-28 14:58:33 - last edited 2021-06-29 00:58:49

@TP-Link so it wasn't a problem with the deco, it was with the modem. I only changed the Ethernet port from 1 to 2 in the modem and that's it. Problem solved. Thx 

Recommended Solution
  1  
  1  
#5
Options
Re:Problems with Deco M9 Plus(US)_V2_1.5.5_210519
2021-06-29 00:58:26

@Diego87 

Great finding.yes @Seb80 Maybe you can also give it a try.

  0  
  0  
#6
Options
Re:Problems with Deco M9 Plus(US)_V2_1.5.5_210519
2021-08-31 18:00:51

@Seb80 Hi!

 

Are you using the firmaware 1.5.3(EU) on the US version?

 

It's working well? safe to use?

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 1221

Replies: 6

Related Articles