Archer C80 router with Deco M4?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C80 router with Deco M4?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C80 router with Deco M4?
Archer C80 router with Deco M4?
2021-07-12 08:00:05 - last edited 2021-07-14 11:50:35
Model: Archer C80  
Hardware Version: V1
Firmware Version:

Hi,

 

Ive got done dead zones in my house, so I've bought a DECO M4 mesh devices. But do they work with a Archer C80 router? It looks like the DECO has it own WiFi and cannot connect as mesh to the C80 router. Or is there a way?

 

On the C80 I saw that there is also OneMesh but with range extenders. Is that the way to go?

 

I still want to use the WiFi of the C80 because it is powerful

  0      
  0      
#1
Options
1 Accepted Solution
Re:Archer C80 router with Deco M4?-Solution
2021-07-12 09:44:09 - last edited 2021-07-14 11:50:35

@Sander85 

 

Firstly, the Deco M4 can work with the C80 without an issue, below are some typical network layouts that you can refer to:
General questions about Ethernet Backhaul feature on your Deco

 

While Deco M4 will not join the Onemesh network of the C80, since Deco mesh and Onemesh are totally different technologies used on different TP-Link products, so they are not compatible. You can check these QAs in this article:
Several questions about the OneMesh™ and Mesh


If you ask, we would suggest you buy a Onemesh range extender instead of a Deco M4 mesh for the Onemesh system, or you can rebuild the mesh system with Deco mesh, which is better than mixing them up.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
4 Reply
Re:Archer C80 router with Deco M4?-Solution
2021-07-12 09:44:09 - last edited 2021-07-14 11:50:35

@Sander85 

 

Firstly, the Deco M4 can work with the C80 without an issue, below are some typical network layouts that you can refer to:
General questions about Ethernet Backhaul feature on your Deco

 

While Deco M4 will not join the Onemesh network of the C80, since Deco mesh and Onemesh are totally different technologies used on different TP-Link products, so they are not compatible. You can check these QAs in this article:
Several questions about the OneMesh™ and Mesh


If you ask, we would suggest you buy a Onemesh range extender instead of a Deco M4 mesh for the Onemesh system, or you can rebuild the mesh system with Deco mesh, which is better than mixing them up.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Archer C80 router with Deco M4?
2021-07-12 11:30:38

@Kevin_Z 

Thanks for the reply. It is clear!

 

But in your opinion, is DECO or OneMesh better or no difference?

 

  0  
  0  
#3
Options
Re:Archer C80 router with Deco M4?
2021-07-14 11:50:28

@Sander85 

 

AFAIK, the performance of the Deco mesh and Onemesh could be similar, but it could depend on how big of your house, and how are the rooms' layouts. Generally, if there are more than two floors, it is suggested to use Deco mesh, and you can put one Deco or two in each floor as per the horizontal layout. Of course, you can use Onemesh as well, but just be sure the main router is in the center of the house, and the range extenders are connecting to the main router directly.

 

To know more about Deco mesh and Onemesh, please read this article:

TP-Link OneMesh™ VS Deco Mesh: What's the Difference?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:Archer C80 router with Deco M4?
2021-07-14 12:20:39
Thanks for the reply, I've tried the DECO but cannot deactivate wifi of the router. plus the connection with the DECO wifi was not that good. I sat 3 meters away. I ordered 2x RE550 so I can configure the OneMesh with the wifi of the router C80, and that will be my setup :)
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 2831

Replies: 4

Related Articles