AX1500 Wi-Fi 6 Router Bandwidth Control for Guest Network
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Bandwidth Control for Guest Network on my wifi router is grayed out, how to enable this? Most of the times the option isn't there. I have tried logging in from different browsers, using incognito/private mode but issue persists. Thanks!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, the Archer AX10/AX1500 doesn't support Bandwidth Control either for the main network or guest network, it only supports QoS, you can confirm if QoS can meet your requirement:
https://www.tp-link.com/support/faq/2693/
Regarding why you can search this option on the router web GUI, the web GUI may not update accordingly to the specific firmware. We will remind R & D to update that in future versions.
Sorry that we don't know much about the hardware and firmware limitations, so we will not know if the AX10/AX1500 hardware will support bandwidth control actually. If you do need this feature, you need to find one that already supports it.
- Copy Link
- Report Inappropriate Content
Hello, the Archer AX10/AX1500 doesn't support Bandwidth Control either for the main network or guest network, it only supports QoS, you can confirm if QoS can meet your requirement:
https://www.tp-link.com/support/faq/2693/
Regarding why you can search this option on the router web GUI, the web GUI may not update accordingly to the specific firmware. We will remind R & D to update that in future versions.
Sorry that we don't know much about the hardware and firmware limitations, so we will not know if the AX10/AX1500 hardware will support bandwidth control actually. If you do need this feature, you need to find one that already supports it.
- Copy Link
- Report Inappropriate Content
Thank you for the clarification. I have checked QoS but unfortunately it doesn't meet my requirements. Bandwidth Control for specific SSIDs or specific devices is what I am looking for, hopefully this gets enabled or included in future firmware releases.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I also use this router and Bandwidth Control would be a very much welcome functionality. QoS doesn't cut it as it is a global feature.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4061
Replies: 4
Voters 0
No one has voted for it yet.