Home Network Community > All Threads > Can´t re-install TP-Link firmware. MR200 v4 bricked?
< All Threads

Can´t re-install TP-Link firmware. MR200 v4 bricked?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can´t re-install TP-Link firmware. MR200 v4 bricked?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can´t re-install TP-Link firmware. MR200 v4 bricked?
Can´t re-install TP-Link firmware. MR200 v4 bricked?
2021-09-28 17:50:54 - last edited 2021-10-03 19:11:38
Model: Archer MR200  
Hardware Version: V4
Firmware Version:

Hi

 

I first installed Archer MR200(EU)_V4_210201 and then I tried to install OpenWrt. But the OpenWrt firmware was not compatible with the v4.

 

Then I re-install Archer MR200(EU)_V4_210201 again, via TFTP, the router reboots and starts to uncompress the kernel. But then I get this error:

Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover

 

What can I do ro recover my MR200v4?

  0      
 
  0      
 
#1
Options
5 Reply
Re:Can´t re-install TP-Link firmware. MR200 v4 bricked?
2021-09-30 03:15:11

@mrhaav 

Hi, Did you try the factory reset the modem?

And currently, our LTE gateway routers do not support firmware recovery via TFTP.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#2
Options
Re:Can´t re-install TP-Link firmware. MR200 v4 bricked?
2021-10-03 14:05:22

@TP-Link 

 

I have TP Link Archer 750 Router (MR200 with LTE , V5), there was an interruption during the firmware upgrade.

From then it never turns on, the power indicator keep flashing.

 

From you post I noticed the LTE model doesn't have TFTP, then how to resolved this issue? How can I reinstall the frimware?

 

  0  
  0  
#3
Options
Re:Can´t re-install TP-Link firmware. MR200 v4 bricked?
2021-10-03 19:20:18 - last edited 2021-10-03 19:21:11

In my case the TFTP "function" was OK.

I create the tp_recovery.bin file with:

dd bs=512 skip=1 count=16000 if=LTE_GATEWAY_1.19.0_0.9.1_up_boot(210201)_all_2021-02-01_19.17.11.bin of=tp_recovery.bin

and loaded it via TFTP. TFTP server IP: 192.168.0.255 /24

  2  
  2  
#4
Options
Re:Can´t re-install TP-Link firmware. MR200 v4 bricked?
2021-11-14 22:41:30

@mrhaav 

  0  
  0  
#5
Options
Re:Can´t re-install TP-Link firmware. MR200 v4 bricked?
2021-11-14 22:47:01

@mrhaav 

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 2176

Replies: 5

Related Articles
tp link archer mr200 v4.100000004 firmware
838 0
tp-link archer mr200 v6 beta firmware
670 0
[Archer MR200 v4] Problem with seeing received SMS
7752 3
Band Selection on MR200 V4
752 0
MR200 v4 Update problem
599 0
TP Link MR200 NO SIMCARD DETECTED
714 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.