Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > Bought WPA4220 TKIT compatibility with older PA4010s

< All Threads

Bought WPA4220 TKIT compatibility with older PA4010s

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Bought WPA4220 TKIT compatibility with older PA4010s

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ptrhbd

2021-11-06 10:39:44 - last edited 2021-12-07 08:51:44

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-11-06

Bought WPA4220 TKIT compatibility with older PA4010s

2021-11-06 10:39:44 - last edited 2021-12-07 08:51:44

Model: TL-WPA4220

Hardware Version:

Firmware Version:

I just bought WPA4220 TKIT as it uses PA4010. I set up via wps so I could clone router ID & Password and it worked fine until tried to pair the 4010 V3 with older 4010s V(uk)1.2s, which worked but the 2 extenders stopped linking to the 4010 v3.

I had to reset all the new kit to get extenders to work but I still need to use several 4010s to provide ethernet connections to the router for other devices via the 4010V3. Is there a way?

1 Accepted Solution

Solla-topee

2021-11-11 08:50:48 - last edited 2021-12-07 08:51:44

Posts: 13685

Helpful: 2364

Solutions: 2035

Stories: 8

Registered: 2020-05-19

Re:Bought WPA4220 TKIT compatibility with older PA4010s-Solution

2021-11-11 08:50:48 - last edited 2021-12-07 08:51:44

Hello @ptrhbd
They are compatible. For powerline compatibility, please check this instruction for more details: How can I select the powerline device?

As we do not want to mess up the working kit when add the new powerline unit, I suggest pairing the extra unit one by one with one of the working unit.

Please add extra powerline unit into existing powerline network by pair button, referring to the instruction:
https://www.tp-link.com/support/faq/1081/

Note: press Pair button only for 1 sec, Power Leds should be flashing on both powerline units in pairing process. ( if the Power Led does not blink, press it for 1 sec again) When the Powerline Led or House Leds are on, the pairing process is done.

If you have tpPLC Utlity installed, please refer to this instruction to pair the powerline units/ add an extra powerline unit by Powerline Key:
https://www.tp-link.com/en/support/faq/1615/

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Recommended Solution

1 Reply

Solla-topee

2021-11-11 08:50:48 - last edited 2021-12-07 08:51:44

Posts: 13685

Helpful: 2364

Solutions: 2035

Stories: 8

Registered: 2020-05-19

Re:Bought WPA4220 TKIT compatibility with older PA4010s-Solution

2021-11-11 08:50:48 - last edited 2021-12-07 08:51:44

Hello @ptrhbd
They are compatible. For powerline compatibility, please check this instruction for more details: How can I select the powerline device?

As we do not want to mess up the working kit when add the new powerline unit, I suggest pairing the extra unit one by one with one of the working unit.

Please add extra powerline unit into existing powerline network by pair button, referring to the instruction:
https://www.tp-link.com/support/faq/1081/

If you have tpPLC Utlity installed, please refer to this instruction to pair the powerline units/ add an extra powerline unit by Powerline Key:
https://www.tp-link.com/en/support/faq/1615/

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Information

Helpful: 0

Replies: 1

Bought WPA4220 TKIT compatibility with older PA4010s

Bought WPA4220 TKIT compatibility with older PA4010s

Information

Voters 0

Tags