Home Network Community > All Threads > Archer MR600 V1 Indian BSNL and VI Networks Status as SIM card prepared Only, Not working
< All Threads

Archer MR600 V1 Indian BSNL and VI Networks Status as SIM card prepared Only, Not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer MR600 V1 Indian BSNL and VI Networks Status as SIM card prepared Only, Not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer MR600 V1 Indian BSNL and VI Networks Status as SIM card prepared Only, Not working
Archer MR600 V1 Indian BSNL and VI Networks Status as SIM card prepared Only, Not working
2022-02-17 15:04:01
Model: Archer MR600  
Hardware Version: V1
Firmware Version: Firmware Version:1.2.0 0.9.1 v0001.0 Build 200511 Rel.44954n

When Band 1 2300MHz Network Signal Below -70dBm RSRP My Device Not working with Default Antennas in Indoor.

 

It is working Only Getting on to Top Floor of the Building, where Signal Streng -65dBm RSRP in Band 1 2300MHz

 

Very Poor Hardware Design

 

But other networks JIo, Airtel working in Band 5, Band 3, Band 40. indoor even in -115dBm RSRP Values..

 

what is the Solution Pls Guide Me anyone Sir.

  0      
 
  0      
 
#1
Options
8 Reply
Re:Archer MR600 V1 Indian BSNL and VI Networks Status as SIM card prepared Only, Not working
2022-02-18 07:25:57 - last edited 2022-02-18 07:26:30

  @dravid 

 

Hi, do you mean the MR600 V1 doesn't work on Band 1 when signal is weak while using BSNL and VI SIM cards? 

Please send us a screenshot of Advanced->Status page to check more information.

For comparison, could you please insert the same BSNL or VI SIM card into another 4G router or smart phone at same location? then please check the signal and band information as well.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer MR600 V1 Indian BSNL and VI Networks Status as SIM card prepared Only, Not working
2022-02-20 05:59:30

  @Sunshine 

  0  
  0  
#3
Options
Re:Archer MR600 V1 Indian BSNL and VI Networks Status as SIM card prepared Only, Not working
2022-02-20 06:06:18

  @Sunshine I have used Original Firmware only from starting, this problem persist past 1 year, i have updated recent firmware also,

Nothing helps

it may be some hardware defect from day 1

 

in my place Other Networks Performing well in some Bands due to Number Of Users, Distance between us and signal tower,

V1 even Latest Firmware also not allowing manual band selection when other Latest Model normal Firmware allowed.

 

so using age old Beta Firmware to utilise at lest its best.. $120USD performing worst than $20USD Dongle to me. Sir..

  0  
  0  
#4
Options
Re:Archer MR600 V1 Indian BSNL and VI Networks Status as SIM card prepared Only, Not working
2022-02-25 08:13:49

  @dravid 

Hi, Thank you very much for your time and patience.

Sorry for the delay.

I would like to follow up on your case by email and forward it to the engineers later.

Could you please check whether you have got an email from us and help me check the required information on the email?

Check What's Currently Going on With Deco Deco Early Access Firmware Open for Test! Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#5
Options
Re:Archer MR600 V1 Indian BSNL and VI Networks Status as SIM card prepared Only, Not working
2022-03-01 04:26:14

  @David-TP  this is BSNL 3G Log File Sir 

File:
BSNL 3G log.txtDownload
  0  
  0  
#6
Options
Re:Archer MR600 V1 Indian BSNL and VI Networks Status as SIM card prepared Only, Not working
2022-03-01 04:27:02

This is Vodafone 4G Log file sir  @David-TP 

File:
Vodafone 4G log.txtDownload
  0  
  0  
#7
Options
Re:Archer MR600 V1 Indian BSNL and VI Networks Status as SIM card prepared Only, Not working
2022-03-01 04:27:50

This is Working Jio 4G Log File Sir  @David-TP 

File:
Working JIO 4G log.txtDownload
  0  
  0  
#8
Options
Re:Archer MR600 V1 Indian BSNL and VI Networks Status as SIM card prepared Only, Not working
2022-05-15 06:47:03 - last edited 2022-05-15 06:54:40

  @dravid @David-TP is it resolved? I'm facing the same issue, in my case I used two VI sim cards, In the first sim card only 4g band 5 is working and in second sim card only 3g is working. On the first day BSNL sim card was working then I inserted jio sim card after that bsnl sim card stopped working. I tried both default and external antenna.

  0  
  0  
#9
Options

Information

Helpful: 0

Views: 1220

Replies: 8

Related Articles
Archer MR600 Indian variant
1154 0
New Archer MR600 BSNL 3G No Signal Problem
1594 0
Vi Sim is not working
421 0
mr600 v2 is not showing all VI lte bands
615 0
Mr 600 v3 Vi india band 41
649 0
mr600 band status problem
673 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.