Connecting RE300 to M4 as mesh

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Connecting RE300 to M4 as mesh

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Connecting RE300 to M4 as mesh
Connecting RE300 to M4 as mesh
2022-02-22 12:35:25 - last edited 2022-02-23 05:58:25
Model: RE300  
Hardware Version: V2
Firmware Version:

I have 3 M4 devices and now I bought a RE300. I would like to connect the RE300 as mesh so devices will switch to it automatically when it's the closest one.

So far I was only able to configure it as an extender.

Any ideas?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Connecting RE300 to M4 as mesh-Solution
2022-02-22 17:55:23 - last edited 2022-02-23 05:58:25

  @Yuhoo 

 

Deco mesh and OneMesh are different technologies and that's why you can't configure RE300 in mesh with Deco M4 but only as an extender.

Check this discussion for more details on that matter.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  2  
  2  
#2
Options
5 Reply
Re:Connecting RE300 to M4 as mesh-Solution
2022-02-22 17:55:23 - last edited 2022-02-23 05:58:25

  @Yuhoo 

 

Deco mesh and OneMesh are different technologies and that's why you can't configure RE300 in mesh with Deco M4 but only as an extender.

Check this discussion for more details on that matter.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  2  
  2  
#2
Options
Re:Connecting RE300 to M4 as mesh
2022-06-30 12:18:09

  @terziyski so which devices can I purchase that can interface with M4 as mesh? (except more M4 of course)

  0  
  0  
#3
Options
Re:Connecting RE300 to M4 as mesh
2022-06-30 12:25:05

  @Yuhoo 

 

In general all Deco units can work together - go through this FAQ to learn more about some precautions and considerations.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:Connecting RE300 to M4 as mesh
2022-06-30 12:32:16

  @terziyski 

So for example W2400 or P9 should connect to my M4 as mesh and reuse the same SSID for seamless connection/transfer by devices?

  0  
  0  
#5
Options
Re:Connecting RE300 to M4 as mesh
2022-06-30 12:40:39

  @Yuhoo 

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1871

Replies: 5

Related Articles