Lost ability to connect to Modem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Lost ability to connect to Modem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Lost ability to connect to Modem
Lost ability to connect to Modem
2022-02-27 14:50:55 - last edited 2022-02-28 08:17:47
Model: Archer VR2800  
Hardware Version: V1
Firmware Version: ver 1

Hi Guys!

Having failed to setup my Modem router whilst using the web management page.

I changed a setting to router only.

This caused the router to reset and i no longer can access it via my web browser or TP-Link tether.

Basically I was attempting to upgrade from my N600 (set as a Router) being a novice I appear to have Locked myself out of the settings.

Can anyone help with some advise please?

Thanks.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Lost ability to connect to Modem -Solution
2022-02-27 15:28:55 - last edited 2022-02-28 08:17:47

  @Newby3 

 

Here is a link to the user's manual of the VR2800.

https://static.tp-link.com/1910012125_Archer%20VR2800(EU)_V1_UG.pdf

 

Check out section "4. 5. 1. Wireless Router Mode" for how to configure the VR2800 as a regular wireless router.

 

 

To be able to get back into configuration GUI the easiest way would be to restore the VR2800 to factory settings.

 

From the above linked manual:

"Reset" (button on the back of the router) -> "Press and hold down for 8 seconds to reset the modem router into factory default settings."

 

Recommended Solution
  3  
  3  
#2
Options
2 Reply
Re:Lost ability to connect to Modem -Solution
2022-02-27 15:28:55 - last edited 2022-02-28 08:17:47

  @Newby3 

 

Here is a link to the user's manual of the VR2800.

https://static.tp-link.com/1910012125_Archer%20VR2800(EU)_V1_UG.pdf

 

Check out section "4. 5. 1. Wireless Router Mode" for how to configure the VR2800 as a regular wireless router.

 

 

To be able to get back into configuration GUI the easiest way would be to restore the VR2800 to factory settings.

 

From the above linked manual:

"Reset" (button on the back of the router) -> "Press and hold down for 8 seconds to reset the modem router into factory default settings."

 

Recommended Solution
  3  
  3  
#2
Options
Re:Lost ability to connect to Modem
2022-02-27 15:38:20 - last edited 2022-02-28 08:17:09
Thank You so much Woozle. You have Been very helpful. I was very concerned as the Modem is brand new and was not the cheapest.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 503

Replies: 3

Related Articles