Archer AX55 v1.0 multiple usb storage devices not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX55 v1.0 multiple usb storage devices not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX55 v1.0 multiple usb storage devices not working
Archer AX55 v1.0 multiple usb storage devices not working
2022-02-28 21:18:17 - last edited 2022-06-09 02:48:33
Model: Archer AX55  
Hardware Version: V1
Firmware Version: 1.0.7 Build 20220120 rel.74083(4555)

Until now I used an ARCHER AC1200 router and the USB storage sharing worked well with acitve USB HUB. Then I bought a brand new AX55 with USB 3.0 slot, and if I connect more devices (2 HDDs) to the USB HUB, the router sees only one of them. All storages and the HUB have active power, and all of them work if connecting separate to the router. Is this some known issue or what's wrong?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Archer AX55 v1.0 multiple usb storage devices not working-Solution
2022-03-01 18:03:05 - last edited 2022-05-17 06:42:17
Thank you, but for luck I solved the problem. The solution was easy: first deconnecting everything, router reset, then connecting the devices after each other. Now everything's fine with 4 usb storages too!
Recommended Solution
  5  
  5  
#3
Options
2 Reply
Re:Archer AX55 v1.0 multiple usb storage devices not working
2022-03-01 03:15:12

kovpet wrote

Until now I used an ARCHER AC1200 router and the USB storage sharing worked well with acitve USB HUB. Then I bought a brand new AX55 with USB 3.0 slot, and if I connect more devices (2 HDDs) to the USB HUB, the router sees only one of them. All storages and the HUB have active power, and all of them work if connecting separate to the router. Is this some known issue or what's wrong?

 

Hello @kovpet, thank you for posting on the TP-Link Community.

 

Can I confirm what's the model number of the previous AC1200 router? Is it Archer C1200 or Archer C6?

 

When you connect the USB hub to the USB 3.0 port of the AX55, will it show up the 2 HDDs on its web page as described in this thread? Or you can only see one of them? Please post a screenshot of the USB page.

 

What are the brands and models of the two HDDs, how about their capacities and formats?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer AX55 v1.0 multiple usb storage devices not working-Solution
2022-03-01 18:03:05 - last edited 2022-05-17 06:42:17
Thank you, but for luck I solved the problem. The solution was easy: first deconnecting everything, router reset, then connecting the devices after each other. Now everything's fine with 4 usb storages too!
Recommended Solution
  5  
  5  
#3
Options

Information

Helpful: 0

Views: 974

Replies: 3

Related Articles