Remote control on Archer VR1210V
Hi,
On my Archer VR1210V is possibile the remote control?
If yes where i can found the related setting ?
Thanks !
Luciano
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Check if this configuration guide is of any help to you https://www.tp-link.com/en/support/faq/1758/ .
- Copy Link
- Report Inappropriate Content
Hi,
Check if this configuration guide is of any help to you https://www.tp-link.com/en/support/faq/1758/ .
Thanks for your answer !
Unfortunately i don't see the section "remote menagement " ( as shown on point 2 of your link) : see my screen attached
up part
down part
- Copy Link
- Report Inappropriate Content
Hi, is the modem provided by your DSL service provider directly?
And may I know your current firmware version of Archer VR1210v?
Sometimes for the ISP customized mode, the web UI might be a little different and the remote management might be disabled by the internet provider.
- Copy Link
- Report Inappropriate Content
Thanks for your support !
1) is the modem provided by your DSL service provider directly? Yes it's provided directly from service provider EOLO (Italy)
2) And may I know your current firmware version of Archer VR1210v? The firmware is up to date ( Archer VR1210v v1_2.0.0 0.9 v6041.0 Build 220304 Rel.6349n )
I suspect my issue due point 1)
p.s. for example with this UI isn't possible firmware update
Best regards
Luciano
- Copy Link
- Report Inappropriate Content
I just bought my AX21 and set it up today. Due to security concerns (it's inevitable that TP-Link cloud or whatever manages remote access will eventually get compromised), I would like for my router to not be remotely manageable.
Is it correct that the only way of disabling this is to logout/unbind my TP-Link ID? I could do this but this presents a dilemma, because I do want to use Dynamic DNS (which requires logging in), but not enabling remote management. Is there any way to accomplish this?
- Copy Link
- Report Inappropriate Content
Hi,
You should be able to select "NO-IP" and "DynDNS" in the list of DDNS Service Providers.
Just use any of these two if you don't want to use TP-Link ID.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1021
Replies: 6
Voters 0
No one has voted for it yet.