Home Network Community > All Threads > No Web Interface and Weak Security Warning for Deco M4 V2
< All Threads

No Web Interface and Weak Security Warning for Deco M4 V2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

No Web Interface and Weak Security Warning for Deco M4 V2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No Web Interface and Weak Security Warning for Deco M4 V2
No Web Interface and Weak Security Warning for Deco M4 V2
2022-05-25 01:45:16
Model: Deco M4  
Hardware Version: V2
Firmware Version: 1.1.9

All my ios devices show a "Weak Security Warning" when connected to the newly setup ISP-provided Deco M4's. My app shows no option to change the security key to address my issue, but it also shows that the Deco's firmware is up-to-date. 

 

Further, I cannot access the web interface using 192.168.68.1 or 192.168.68.1:30000 even when connected through the Ethernet cable. I can ping the ip address but page refuses to connect or the page cannot be found. 

 

Has anyone experienced and/or solved this? Thank you!

 

  0      
 
  0      
 
#1
Options
4 Reply
Re:No Web Interface and Weak Security Warning for Deco M4 V2
2022-05-25 06:12:25

  @user-TPDeco 

Nice to see you again. Please refer to the reply on the other post.

 

--------------------------

Deco X50-PoE is ready for your advice. If you are interested, please help us complete the following survey.

Deco X50-POE Survey

Check What's Currently Going on With Deco Deco Early Access Firmware Open for Test! Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:No Web Interface and Weak Security Warning for Deco M4 V2
2022-06-17 14:29:50

  @user-TPDeco 

 

I'll be following in this. I have the same version 1.1.9 and can't access web interface but can access the app. I hope this problem can be resolved!

  0  
  0  
#3
Options
Re:No Web Interface and Weak Security Warning for Deco M4 V2
2022-06-18 17:45:49

  @David-TP 

 

I am facing same issue . i have same version but can not acess web . I dont know what should i do 

  0  
  0  
#4
Options
Re:No Web Interface and Weak Security Warning for Deco M4 V2
2022-06-20 02:00:12

  @sonjizz 

Hi, the firmware 1.1.9 Build 20200119 is a customized version for the local Philippine internet service provider PLDT and the users need to contact the ISP directly to check whether there is a suitable firmware available for update.

 

shakirfateh Hi I see you are located in Pakistan. is your current firmware version also 1.1.9 Build 20200119?

 

Thank you very much.

Best regards.

--------------------------

Deco X50-PoE is ready for your advice. If you are interested, please help us complete the following survey.

Deco X50-POE Survey

 

 

Check What's Currently Going on With Deco Deco Early Access Firmware Open for Test! Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 757

Replies: 4

Related Articles
Deco M4 V2 - No Web Interface and Weak Security Warning
566 0
Settings in App but not web interface
907 2
Web interface - DECO M4
19516 1
RE455 weak security
1138 2
RE450 WEAK SECURITY
2619 0
RE455 Weak security
609 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.