Home Network Community > All Threads > [Request] Force specific devices on 5 GHz connection
< All Threads

[Request] Force specific devices on 5 GHz connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

[Request] Force specific devices on 5 GHz connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
[Request] Force specific devices on 5 GHz connection
[Request] Force specific devices on 5 GHz connection
2022-06-10 14:20:57
Tags: #Feature Request #Bandwidth Control/QoS #Band Steering
Model: Archer AX55  
Hardware Version:
Firmware Version:

It would be great if there was a way to force a specific device to always use the 5 GHz connection instead of 2.4 GHz while maintaining the same SSID for 2.4 and 5 GHz (Device with MAC-Address X should use 5 GHz when connected, rest is automatic).

Of course, there is the workaround to set up a guest network with only 5 GHz but that is not a permanent solution.

Would it be possible to implement such a thing?

  6      
 
  6      
 
#1
Options
3 Reply
Re:[Request] Force specific devices on 5 GHz connection
2022-06-10 14:57:47

  @GreenThreat 

 

 

On a traditional router like the Archer AX55, it is.  I would assume you are using Smart Connect.  With this feature enabled the bands will share a single SSID and Password.  The router will also do all of the network assignments.  This includes the band a device is assigned to, the channel the bands use, and the channel bandwidth.  If you are making use of OneMesh then this feature is unavoidable but if you are not you can disable it and set two separate SSID, one for 5GHz and one for 2.4GHz.  Just go into the router's UI.  Click on Advanced >  Wireless > Wireless Settings.  At the top of the screen, you should see Smart Connect.  Just disable the feature, set your bands and that is it.   

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  1  
  1  
#2
Options
Re:[Request] Force specific devices on 5 GHz connection
2022-06-10 17:59:54

  @Carl Thanks for they reply, however, this is not quite what I am looking for. I'd like to keep both bands on the same SSID, just force a single device to always use 5GHz, the rest should always be automatically assigned one of the two.

  3  
  3  
#3
Options
Re:[Request] Force specific devices on 5 GHz connection
2022-06-13 18:14:50

  @GreenThreat 

 

Unfortuently at this time that is not possible.  But we will add it to our request list that we send monthly to our development team.  

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  5  
  5  
#4
Options

Information

Helpful: 6

Views: 4994

Replies: 3

Tags

Feature Request Bandwidth Control/QoS
Band Steering
Related Articles
force device to always connect to a specific deco?
92759 43
How to force connect specific device to a specific Deco
4384 2
2.4 Ghz and 5 Ghz Devices
744 0
Force a device to connect to a specific Deco
2436 2
How to force connect to a specific Deco
5997 9
5 Ghz Network
37 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.