Problem with UE306
Hi, I recently bought a UE306 ethernet adapter, but I encounter a problem. Adapter can only work at 100mb/s Full Duplex speed or lower, when I try to tweak speed to 1gb/s it disconnects and only shows an "Unidentified Network" message.
I'm using CAT 5E cable, adapter is connected to USB 3.1 port.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @sadcenter
If trying to change Network adapter Speed to Auto Negotiation , what is the wired link speed on adapter
1. Please confirm the router port is 1000Mbps port or it's a Gigabit router or Ethernet adapter can not negotiate with it at 100Mbps.
You might check with router support and see if there is setting on router to change the port speed, force the port speed to 1000Mbps.
2. Disable other network adapters except the tp-link wired adapter
3. Try a different Ethernet cable
If the same, can I have know the model of router that the PC( adapter) connected to, do you have any port speed settings on the router?
- Copy Link
- Report Inappropriate Content
@Solla-topee Hi,
When using Auto Negotiation wired link speed is 100mb/s
1. All router ports are able to work on 1000mb/s
2. I disabled on-board ethernet card in BIOS
I'm using TP-Link Archer AX10 router. I only found one option about Auto Negotiation speed.
- Copy Link
- Report Inappropriate Content
Hello @sadcenter
Thank you for more test and sharing more information here.
If you have a different Ethernet cable, test a different Ethernet cable
To better assist with your case, I created a support email TKID220704347 to follow up further, please check your email inbox for a new driver.
- Copy Link
- Report Inappropriate Content
Glad to know you have sorted out it was the bad Ethernet cable. Thank you for updating solution with us in the support email.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2272
Replies: 4
Voters 0
No one has voted for it yet.