Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > VR800 as access point behind network with internet access (not messing up DHCP in main network)

< All Threads

VR800 as access point behind network with internet access (not messing up DHCP in main network)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VR800 as access point behind network with internet access (not messing up DHCP in main network)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ovogt

2022-07-02 11:25:06 - last edited 2022-07-07 09:43:21

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-07-02

VR800 as access point behind network with internet access (not messing up DHCP in main network)

2022-07-02 11:25:06 - last edited 2022-07-07 09:43:21

Model: Archer VR2800

Hardware Version: V1

Firmware Version: 0000000

Hi, I just got fiber broadband with the EERO PRO gateway but I would like to continue using my Archer VR800 for a 'test network'...

When I plugin the VR2800 straight into the network Internet access seems to work but it starts assigning IP addresses to the devices on the main network... How would I setup the VR2800 to only assign DHCP network IDs to the devices connected directly but not to those on the 'main' network and act as a network gateway/router at the same time?

Thanks,

Oliver

1 Accepted Solution

terziyski

LV7

2022-07-02 12:59:27 - last edited 2022-07-07 09:43:21

Posts: 7141

Helpful: 5354

Solutions: 1220

Stories: 7

Registered: 2013-10-12

Re:VR800 as access point behind network with internet access (not messing up DHCP in main network)-Solution

2022-07-02 12:59:27 - last edited 2022-07-07 09:43:21

@ovogt

You can configure VR2800 in 'Wireless Router' mode - thus it will assign IP addresses only for devices connected directly and won't mess with your main network.

Here's a guide on how to do that.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

Recommended Solution

2 Reply

terziyski

LV7

2022-07-02 12:59:27 - last edited 2022-07-07 09:43:21

Posts: 7141

Helpful: 5354

Solutions: 1220

Stories: 7

Registered: 2013-10-12

Re:VR800 as access point behind network with internet access (not messing up DHCP in main network)-Solution

2022-07-02 12:59:27 - last edited 2022-07-07 09:43:21

@ovogt

You can configure VR2800 in 'Wireless Router' mode - thus it will assign IP addresses only for devices connected directly and won't mess with your main network.

Here's a guide on how to do that.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

Information

Helpful: 0

Replies: 2

VR800 as access point behind network with internet access (not messing up DHCP in main network)

VR800 as access point behind network with internet access (not messing up DHCP in main network)

Information

Voters 0

Tags