tp-link Archer TX3000E Ver.1(hotspot PC) only using 20mhz channel
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Good day,
So I play a lot of VR games using my Oculus QUest 2. With the coming of Windows 11.... the regular USB link doesnt work at all. A work around i found is using Air Link ( wireless Wi-Fi based).
I found that my router works ok, but i wanted to try and use my pc as a hotspot and directly connect to it. This should have negligable speed gains but as it would be the only device to connect to that "router or hotspot" it would work out better.
As i was tinkering with the adapter i went to the Device manager > Intel(R) Wi-Fi 6 AX 200 160Mhz device > Properties > Advanced and selected the 5ghz band ( also checked the 2.4ghz). There i could only select 20Mhz all of the others werent able to be selected. The options to select were 20Mhz and Auto. I would like to know if i can make a hotspot, and force it to use the 160Mhz band or 80 etc. ( those that arent as crowded ). Any help would be much apreciated. Thanks!
