One Mesh info on Tether App

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

One Mesh info on Tether App

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
One Mesh info on Tether App
One Mesh info on Tether App
2022-08-23 09:20:41 - last edited 2022-08-25 08:58:42
Model: TL-WPA7617 KIT  
Hardware Version: V1
Firmware Version: 1.0.2 Build 210909 Rel.62151n

Since the last Tether App update, I'm pleased to see that my two TL-WPA 7617 powerline extenders are now recognised as One Mesh units in the Tools section of Tether for my Archer MR600 modem router.  They were set up as one mesh units, but until this update, never showed in the Tether App.

 

It shows the correct number of Connected Clients, but fields such as Signal Strength or Link Speed 2.4 and Link Speed 5 never seem to change.  Signal stength seems to permanently show 4 bars.  Link Speeds are permanently on 0kbps.  Is this normal?  Or should I expect to see more information.  

  0      
  0      
#1
Options
1 Accepted Solution
Re:One Mesh info on Tether App-Solution
2022-08-24 07:55:58 - last edited 2022-08-25 08:58:42

  @P40 Thank you very much for the case details. 

As checked the OneMesh Info page in Tether app shows the OneMesh Wireless Link speeds between Router and OneMesh Extenders (basically for range extender products).

OneMesh powerline device build mesh with router through powerline and Ethernet instead of  Wireless , therefore the Wireless Link speed shows 0Kbps.Hope this help explain the situation.

Thanks again for the feedback, we will also see if this part can be optimized in the future.

Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:One Mesh info on Tether App
2022-08-24 03:09:11 - last edited 2022-08-24 03:09:57

 Hello  @P40 

Thank you for the sharing, can you attach a photo here (click the pic.icon in the forum to upload the photo) showing the Link speed is 0Kbs, thank you.

What is the version of your Tether APP, the model of your and the phone OS? Thanks!

 

  0  
  0  
#2
Options
Re:One Mesh info on Tether App
2022-08-24 06:42:37

Hello  @Solla-topee 

 

Thanks for your reply.  I'm running the tether app (ver 3.7.2) on a Lenovo M8 Tablet with Android 10 and on an Asus Zenpad with Android 5.  Same problem on both.

 

  3  
  3  
#3
Options
Re:One Mesh info on Tether App-Solution
2022-08-24 07:55:58 - last edited 2022-08-25 08:58:42

  @P40 Thank you very much for the case details. 

As checked the OneMesh Info page in Tether app shows the OneMesh Wireless Link speeds between Router and OneMesh Extenders (basically for range extender products).

OneMesh powerline device build mesh with router through powerline and Ethernet instead of  Wireless , therefore the Wireless Link speed shows 0Kbps.Hope this help explain the situation.

Thanks again for the feedback, we will also see if this part can be optimized in the future.

Recommended Solution
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 665

Replies: 3

Related Articles