Archer AX11000 problem with internet connection after upgrade of firmware
After firmware upgrade there is no internet connection after start TP-LINK router and ISP modem. TP-LINK router is faster with starting up and it is waiting with red led for ISP modem. After ISP modem is connected to internet, TP-LINK router is not connecting and "waiting" with red led. Also TP-LINK is not connecting automatically to the internet after ISP modem restart. When I disconnect LAN cable or I restart TP-LINK router then TP-LINK router is connecting without problem. I noticed that TP-LINK is connecting without any problem to the internet when ISP modem is already connected to internet. Something happened after firmware upgrade with automatic connection to the ISP modem when it is not connected to the internet. Before upgrade, TP-LINK "was waiting" for IPS modem with red light, and when IPS modem was connecting to the internet then TP-LINK also was connecting to the internet. Any suggestions?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @gozamet @TheSiahSauce @vcartera @Smalltalker
I'm replying to inform you that we have provided an early release version of firmware for Archer AX11000 in this thread, please check and install the firmware to observe if the previous reported disconnect issue has been resolved:
Early Release firmware for Archer AX11000
Please tag me if you have any further inquiries.
- Copy Link
- Report Inappropriate Content
Thank you for reaching out to us and welcome to the TP-Link community.
Can I know who is your ISP, and what kind of WAN Connection Type you are using on the AX11000 when connecting to the internet?
When the modem restarts and reconnects to the internet, does the AX11000 get the correct WAN IP address from the modem or not? Please login to its web interface page to confirm it next time when the issue happens.
- Copy Link
- Report Inappropriate Content
ISP connection: RJ-45
Manufacturer: ARRIS (TG2492S)
Situation:
1. Everything is working: ARCHER AX11000 connected, ISP is connected
2. Reset of ISP (ISP is connecting to internet)
3. ISP is connected to the internet and AX11000 is frozen with red led (with "poor network")
4. Unplug and plug LAN cable to the AX11000 - then AX11000 is connecting automatic
Looks like AX11000 trying to connect to ISP but freezes with "poor connection" status. When you unplug and plug LAN cable everything is working.
Before upgrade of software from V1_210719 to 1.3.1 Build 20220721 rel.61848(4555) everything worked perfect.
- Copy Link
- Report Inappropriate Content
Thank you very much for getting back with the detailed info.
To assist and figure it out efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up. Thank you.
- Copy Link
- Report Inappropriate Content
I made two another tests:
1. I connected ISP modem directly to the computer and after restart of ISP modem, computer connects to the internet without any problem.
2. I have old TP-LINK router ARCHER C5400X. I repeated all scenario and C5400X is connecting without problem too.
Now we can see that there is problem with your firmware upgrade, old firmware was working perfectly, ARCHER C5400X is working without problem and PC connected directly to ISP modem connects to the internet perfectly.
- Copy Link
- Report Inappropriate Content
Thank you very much again for the follow-up and the comparison test.
I have also reported this to the engineering team for further analysis, you may also discuss with them directly via email to get this confirmed and figured out quickly.
I will update here and you if this gets confirmed or fixed. It's suggested to subscribe to this thread or this one to get the updates.
- Copy Link
- Report Inappropriate Content
Downgrade of firmware to version 1.3.0 Build 20220221 solved my problem for now.
- Copy Link
- Report Inappropriate Content
I am also having issues with ax11000 after firmware update. I have posted a few times on this with details.
Noticed my issues occurs every hour exactly. Release and then Renew is solving for me.
Luckily, I have my Linksys router until then. This router is steady, so definitely an issue with the ax11000.
- Copy Link
- Report Inappropriate Content
Hello @TheSiahSauce
I just replied to you in another thread, please check:
https://community.tp-link.com/en/home/forum/topic/272492?replyId=1127116
- Copy Link
- Report Inappropriate Content
I think problem will be solved very soon in official version of newest firmware
TP-LINK crew works very hard and I have received beta version of the newest firmware which is bug free. For now my connection is ok like before.
- Copy Link
- Report Inappropriate Content
@gozamet hi, where did you found the old Firmware? Unfortunately Swiss region site does not provide any firmware to download from their site, and the only one I can find is US variant. Can you please provide a link? Thanks!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 7294
Replies: 47
Voters 0
No one has voted for it yet.