Home Network Community > All Threads > er605 as dhcp server
< All Threads

er605 as dhcp server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

er605 as dhcp server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
er605 as dhcp server
er605 as dhcp server
2022-09-11 15:00:33 - last edited 2022-09-12 06:26:19
Tags: #dhcp
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.2.0 Build 20220114 Rel.76871

Hi,

I have an er605 as my main router and i connected vr400 as a wireless access point to it,
i configured the vr400 with inetrnet connection dynamic ip, i set the internal ip to 192.168.2.1 and enabled dhcp, however i would like to configure it to dhcp relay and get the dhcp from er605

how do i configure er605 to delegate the dhcp on 192.168.2.0/24, the er605 does already delegate dhcp over 192.168.0.1/24

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:er605 as dhcp server-Solution
2022-09-11 21:04:04 - last edited 2022-09-12 06:26:19

  @Tnimni 

 

If you want your er605 to be your main router and DHCP server, then you need to set VR400 with LAN IP address in 192.168.0.1/24  network (i.e. 192.168.0.254):

 

 

Here's the official guide for configuring a DSL modem in AP mode.

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:er605 as dhcp server-Solution
2022-09-11 21:04:04 - last edited 2022-09-12 06:26:19

  @Tnimni 

 

If you want your er605 to be your main router and DHCP server, then you need to set VR400 with LAN IP address in 192.168.0.1/24  network (i.e. 192.168.0.254):

 

 

Here's the official guide for configuring a DSL modem in AP mode.

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
Re:er605 as dhcp server
2022-09-12 06:28:15

  @terziyski thank you for this, it solved the issue

 

it also works without selecting the DHCP relay option, even if slower

1 more question if you don't mind, let's say I want to isolate the wifi network, i.e. have it on a different subnet using the er605 and vr400, how do I do it?
i believe I need to configure vlan right? i would appreciate help

  0  
  0  
#3
Options
Re:er605 as dhcp server
2022-09-12 09:41:39

  @Tnimni 

 

Yes, that's correct. If you want to isolate VR400 traffic, you have to use VLANs on er605.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1109

Replies: 3

Tags

dhcp
Related Articles
DHCP server not stable
697 0
DHCP Server
561 1
DHCP server off
546 0
Ex230v bridge mode for ER605
1145 0
Some clients use wrong DHCP server
2151 0
Enable DHCP server in AP Mode
1193 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.