AX55 slow speed wifi 6
Hi, my internet speed is 600 / 200mb.
I can easily reach the given speed on the cable, but not after wifi. After wifi maximum speed is 400 / 200mb on 5ghz (wifi6).Why can't I get faster speed on wifi?
Notebook card: intel ax200
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The link speed seems quite good on the Notebook, I'm wondering how did you test the actual speed when connecting to the AX55's 5G.
Try getting another phone or laptop which also supports wifi 6 to test if the speed can reach 600 mb if possible. You can also try to change the wireless settings on the AX55, such as channel, channel width, you can try changing the wireless security to WPA2-PSK AES.
- Copy Link
- Report Inappropriate Content
I tested all available channels and protections, it did not work. I also checked on 3 different laptops with card: AX200, AX201, Mediatek MT7921
and the maximum speed via wifi is 400mb, where in the network they reach 800mb in tests on this router.
how is it possible that with a 2.4Gb / s connection it only pulls 400mb for me?
tests are 1.5m from the router
- Copy Link
- Report Inappropriate Content
@Liverpool20 Thank you very much for the suggestions.
@Krzych To assist and figure it out efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up. Thank you.
- Copy Link
- Report Inappropriate Content
@Kevin_Z in my case i ve a 500mbps internet speed provider but sometimes AX55 reaches less than 1 mbps
Archer AX55 Wifi 5Ghz
Internet Provider router 5Ghz
- Copy Link
- Report Inappropriate Content
For further clarity on the issue, please respond to the questions below:
1. What is the device you are connecting to the 5G network and testing the speed (shown in the pictures)? Is it an AC or AX device? What is the link speed when it is connected to the AX55's 5G network? You can follow this guide to find it out.
2. Try to modify the 5G wireless settings, such as channel and channel width. You need to disable Smart Connect first, then you can modify the wireless settings for specific network.
3. If there are other devices that also support 5G connection, please try connecting to the 5G network and test the speed on them to see if they behave the same or different.
4. What if you connect a PC to the AX55 with a cat 6 cable, how about the speed?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1773
Replies: 5
Voters 0
No one has voted for it yet.