TL-WA1201 5gHz not working in multi-SSID mode
Hello,
After configuring the AP in mutli-SSID mode, Any 5Ghz SSID is not working.
This was working in default mode (AP mode).
I trie dto configure SSIDs with the same name of the 2.4 GHz networks or a different name. The result is still the same.
Note that 2.4GHz works well.
Is this known ? Is there a fix that can be applied ?
Thanks,
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @Nakor
Thank you for the feedback, the case your report seems to be new. To look into this further, can you help confirm some case details here
1> The model of router, and the network topology
e.g. ISP router-switch Model XX - AP
What are the network devices that connected to this AP?
2>the photo of Multi-SSID mode settings on the AP, and photos of VLAN settings on the switch
Please help describe the subnet you've set, thank you.
- Copy Link
- Report Inappropriate Content
Here is the archi:
opnsense (router/firewall) ---(Trunk)--- switch netgear GS308E ---(Trunk)--- AP
SSID in 2.4GHz are using the same VLANS as 5GHz so its not a connection/Trunk/switch issue.
The signal is just not broadcasted (and is not configured in hidden).
In AP Mode everything is OK, but not in Multi-SSID mode.
Note that I also done a factory reset and I have the same issue.
Here are the screenshots:
- Copy Link
- Report Inappropriate Content
Thank you very much for more case details, to better assist with your case we created a support email TKID221026523 and get it escalated, please check your inbox.
There is a firmware in the ticket, please check if that works for you.
- Copy Link
- Report Inappropriate Content
@Solla-topee @Nakor In case it helps... I have installed many TL-WA1201 and I have found a random fault with 5GHz not working after loading config and/or updating firmware. In all cases, I found that doing a factory reset, then manually configuring the AP fixed it. Applying a saved config breaks it again, so only manually configure.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1004
Replies: 6
Voters 0
No one has voted for it yet.