Official Release Deco X50/X55 V1/V1.2/V2 with VPN/Static Route/MTU
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello Everyone,
We are excited to announce the official firmware version 1.2.x for Deco X50/Deco X55 V1/V1.2/V2 has been released recently. With this new firmware, you can now configure the VPN server/client, and other advanced features on the Deco.
Deco X50_V1/V1.2/V2
Deco X55_V1/V1.2/V2
>>How to update the firmware via web UI
Release Note:
New features:
1. Support for VPN server features, including Open VPN, PPTP VPN and L2TP/IPsec VPN.
2. Support for VPN client features, including Open VPN, PPTP VPN and L2TP/IPsec VPN.
3. Support for Static Route under Deco APP>More>Advanced.
4. Added the ability to customize the MTU size under Deco APP>More>Internet Connection>Internet Connection Type.
5. Added IOT network function.
* The following features(6-12) are also supported on 1.1.0 version:
6. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
7. Added support for customizing Satellite Deco Signal Source under Deco App > Internet > Select the Satellite Deco > Signal Source.
8. Added support for customizing clients Connection Preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
9. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS.
10. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP.
11. Added a prompt notification when the Ethernet link rate goes down to 100Mbps.
12. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
Improvements:
1. Optimized the MAC Clone function.
2. Improved system reliability and security.
Note:
1. The Advanced features need to be configured on the Deco APP and please make sure your Deco APP is up to date.
2. Some new features would not be available when the router is working in Access Point mode.
3. The firmware downgrade needs to be performed by firmware recovery. >>How to use firmware recovery on Deco
Please feel free to comment below if there is any question about the new firmware.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I tested it but the VPN still doesnt work for me.
Let me know how you get on
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Propilotwannabe wrote
When is this going to be available for X50 PoE HW version 1.6? Roughly speaking... this summer? next year?
Maybe it be available at same time for X50 HW version 1.2... 2025 or with tons of luck, next year.
I can't understand why there are 4 hardware versions and no updates for 3 of them. I have 3 x50 HW v1.0 updated and 2 x50 HW v1.2 with no update. I am thinking that I have wasted my money with this brand.
@David-TP, Please, could you tell us any notice about updates por X50 v1.2?
- Copy Link
- Report Inappropriate Content
@Mbauer5 Hey Mark, I have now got a new beta version that I am testing.
I am waiting for a debug version so I can check the firewall rules and also the routes as something is not right with this one.
I have reported back to the engineering team with early findings.
- Copy Link
- Report Inappropriate Content
Thanks Ian,
Sounds like you are making progress, much appreciate you and the TP guys and looking forward to the updated code!
Mark
- Copy Link
- Report Inappropriate Content
When will release thi firmware 1.2.2 for hardware 1.2 ?????
No news :-(
PLS RELEASE IT for 1.2 hardware
Thank
Hispa
- Copy Link
- Report Inappropriate Content
David-TP wrote
Personally, I don't think Deco X50 will support "Test Internet speed" later on in the new firmware.
As for the bandwidth issue in AP mode, a new Deco APP version 3.3.x will be released very soon and it will help with this issue.
@David-TP not visited for a while
Why will it not be supported? This is a way to test your speed from router to see if anything is causing network issues internally
When will the new deco app be released to resolve the bandwidth issue?
Also still get notifications for reports on the 1.2.0 firmware, is this bug still in the 1.2.2 release?
Have you implemented auto-optimisation of wifi if the signal becomes congested, like 99.9% of other routers on the market do instead of just having the option to manually optimise?
Is there any point in updating to the latest release 1.2.2 if the main issue of wan port is not resolved? I have contacted Amazon to get a full refund on the unit as running in AP is not worth the price of the unit
and it's pathetic that you are unable to put the word 'it' after a word ending in 't' without it throwing a wobbler and saying the below
The following sensitive language has been used which goes against the rules of the Community: "* it". Please enter again.
- Copy Link
- Report Inappropriate Content
Hi, The 1.6.0/1.1.0 firmware for Deco X50-POE was released last week and you could find more details here:
https://www.tp-link.com/en/support/download/deco-x50-poe/#Firmware
best regards.
- Copy Link
- Report Inappropriate Content
Nice to see you again.
You might notice Deco M5 still supports "Test internet speed" so it might not be released to the Deco APP upgrade, more about the product software. The Monthly/weekly report notification issue in AP mode has been improved on 1.2.2 and the latest Deco APP (3.3.41 for IOS and 3.3.18 for Android) also optimizes the real-time speed rate issue. Compared with 1.2.0, 1.2.2 hasn't made any adjustment to WAN-LAN auto-sensing feature, and the latest news about this feature request is that the engineers have agreed to add an option to fix the WAN port on the Deco APP.
You might notice that some questions are not answered, like the channel selection or ETA about the WAN-LAN auto-sensing, there is no further updated news about them otherwise I would be happy to share it with community members, and a random guess would cause further confusion here.
For the community rules about sensitive words, I think something you write might accidentally trigger a false alarm, and if you do not mind, you could leave me a message about this content and we could have a further check.
Thank you very much for your attention.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 36199
Replies: 175
Voters 5
