Interface Grouping STILL missing on latest firmwares. NEED DOWNGRADE ASAP!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Interface Grouping STILL missing on latest firmwares. NEED DOWNGRADE ASAP!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

netbystorm

2023-01-04 20:43:27 - last edited 2023-05-19 03:19:11

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-01-04

Interface Grouping STILL missing on latest firmwares. NEED DOWNGRADE ASAP!

2023-01-04 20:43:27 - last edited 2023-05-19 03:19:11

Tags: #Firmware Update

Model: Archer VR400

Hardware Version: V2

Firmware Version: Archer VR400(EU)_V2_220126

At this post here it was signalled that the option "Interface Grouping" went missing. And that it was signalled to the R&D team. And it would take some time.
Post: Interface Grouping disappears after latest firmware upgrade - Home Network Community (tp-link.com)

The 2022 firmware AFTER that, 2 years after, STILL has the same issue.

The option "Interface Grouping" is still missing. Please explain why hide the option while it is still supported by the firmware?

Yes, applying old settings to the new firmware works.

I took the time to signal this problem because, really, the old firmware IS GONE (0.2.0) and now I have NO WAY of using this option anymore!

Can you please replace the newest firmware with the fix asap (not in two years, but maybe in a month)?
Also, please post the ORIGINAL FIRMWARE IMMEDIATELY, as i cannot use the router anymore as intended.

I am assuming this is true for all the new firmwares for the Archer line.

This unfortunately teaches users to NEVER upgrade.

EDIT:
There is a pletora of posts signalling this problem, sometimes not addressed and closed.
Please FIX THIS asap, as people is led to believe that maybe the router does not support this, while in reality IT DOES.

Interface grouping - Home Network Community (tp-link.com)
Interface grouping??? - Home Network Community (tp-link.com)
Interface Grouping Option disappeared after firmware upgrade - Home Network Community (tp-link.com)

1 Accepted Solution

David-TP

2023-05-19 03:16:27 - last edited 2023-05-19 03:19:55

Posts: 12509

Helpful: 1734

Solutions: 1203

Stories: 9

Registered: 2020-04-14

Re: Interface Grouping STILL missing on latest firmwares. NEED DOWNGRADE ASAP!-Solution

2023-05-19 03:16:27 - last edited 2023-05-19 03:19:55

@netbystorm

Hi, Thank you very much for the feedback.

If you are having a similar issue# Interface Grouping disappeared after updating to the latest official firmware # on Archer VR400 v2, VR600 v2, VR900 V3, and VR2800 v1, It is suggested to send an email to support.forum@tp-link.com to get the firmware which brings back Interface Grouping feature.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.